Can the bathroom be as flat as the living room after the floor tiles are paved?

Updated on Bathroom 2024-04-04
9 answers
  1. Anonymous users2024-01-23

    After the bathroom is paved with floor tiles, it can be as flat as the living room after being paved with tiles (it should be explained and confirmed before construction). But usually the bathroom is 10 mm lower than the living room.

  2. Anonymous users2024-01-22

    Generally, when decorating the living room, lay laminate flooring, it is best to pave the door stone at the door of the bathroom, the door stone is a little higher than the bathroom (about 1 cm), the inner side of the door stone is better to grind the hypotenuse, and the floor should be as flat as the door stone. How much do you stay? Depending on how thick the floor you choose, if it's a 12mm floor, leave 15mm, if it's a 15mm floor, leave 18mm

  3. Anonymous users2024-01-21

    Bathrooms are not all with non-slip bricks, and the living room with bricks should be different, our home is also just paved with bricks in the past two days, the bathroom is paved with a waterproof layer on the line, the key is to see the level of the foreman, it is best to please be awesome, our home is very flat.

  4. Anonymous users2024-01-20

    Hello, I'm glad to answer your question Yes, you can level the ground before laying the floor tiles, so it is possible to achieve a parallel state of two rooms However, the position of the bathroom door should be done to prevent the bathroom from leaking I hope my answer can help you.

  5. Anonymous users2024-01-19

    As the question is answered, the bathroom can be as flat as the living room after the floor tiles are paved. But there's a point of reference

  6. Anonymous users2024-01-18

    It's better to bai not the same flat! du

    Bathroom bath、

    The basin and toilet area all need water, if the water is not smooth or the inside and outside are accommodated.

    If the bathroom floor is as high as the living room, there may be water seepage or water flooding in the living room, and the living room is not waterproof, and the loss will be great. Therefore, the finished surface of the bathroom floor is generally controlled at a height of 5-10mm lower than that of the living room.

  7. Anonymous users2024-01-17

    Generally in the loading.

    The living room was paved during the repair.

    It is best to lay the floor at the door of the sanitary room.

    The door stone, the door stone is a little higher than the bathroom (about 1 cm), the inner side of the door stone is a little better, and the floor should be as flat as the door stone. How much do you stay? Depending on how thick the floor you choose, if it's a 12mm floor, leave 15mm, if it's a 15mm floor, leave 18mm

  8. Anonymous users2024-01-16

    It's better not to be as flat!

    Bathroom bath, basin, toilet area all need water, if the water is not smooth or accidentally blocked, there is the possibility of water accumulation, if the bathroom floor is as high as the living room, there is a possibility of water seepage or water flooding of the living room, the living room is not waterproof, the loss will be great. Therefore, the finished surface of the bathroom floor is generally controlled at a height of 5-10mm lower than that of the living room.

  9. Anonymous users2024-01-15

    It is recommended that it is better not to be the same flat, because the bathroom will often use water, and the bathroom is generally lower than the living room, otherwise the water will easily flow to the living room.

Related questions
6 answers2024-04-04

The floor is tiled, and most people currently use the dry paving method, and there is less wet paving. Dry paving method refers to the method of sprinkling water and stirring evenly with 1: volume ratio) cement and sand to form a dry cement mortar (dry and wet consistency, it is advisable to knead it into a ball by hand and not loose), and use tiles to level the ground. >>>More

4 answers2024-04-04

Bathroom bricks are all pasted vertically, there is no horizontal paste, and there is no horizontal installation method for dry-hanging stones. >>>More

2 answers2024-04-04

Excluding the factor of the waterproof layer, then the quality of the tile is not good, the density is small, and there is water absorption, just like if you throw a red brick into the water and take it out overnight to knock it open, the bricks are wet, and when the tile is saturated with water, of course, it will seep out along the threshold stone. >>>More

1 answers2024-04-04

Coping with a clear paint that does not smash bricks for a few years. >>>More