-
Anonymous users2024-01-24It depends on how you start to talk, under normal circumstances, the ceiling with modeling needs to add money, which is not easy to do, and it is very labor-intensive!
First of all, the wood should be sanded and smoothed.
Then scrape the putty. >>>More
The round ceiling is not good to do the yin and yang corners, generally when the carpenter does the ceiling, the curvature and joints of the gypsum board should be dealt with a little bit, that is, the bottom layer is done, and the gypsum board does not need to hang too thick putty powder, and then when the first paint is done, the edge is generally treated with kraft paper to prevent cracking.
In principle, it can be cleaned with the thinner corresponding to the "paint". >>>More
No, the one used on wood and the one used on iron sheet are not the same kind of paint.
The price of scraping a big white flat needs about 5-10 yuan. Generally speaking, there is also the influence of the market, and the cost of scraping the white in the peak season of decoration is relatively high, and it will be cheaper in the off-season of these decorations in the winter season. If it is hardcover, it can be more expensive, and the simple road is about 3-5 yuan square meters.