-
Anonymous users2024-01-24The main keel is 1: the main keel per square meter of the ceiling is meters), the secondary keel is 1:, the main hanger 1:, the auxiliary bone hook 1:, the remaining accessories (main connection, auxiliary connection, support, screw rod, burst nails) and so on are 1. Drywall is basically 1: the shape should be counted).
The installer will test the size of the major hangers, card the main keel on the hanger, intercept the required size, and check whether the main keel is parallel after being stuck into the household.
The correct installation method of the triangular keel is to put the triangular hanger into the triangular keel and fix it on the main keel in turn. The installer will adjust the distance between the keels to 300mm before fixing the triangular keel, and arrange the air outlet pipe of the range hood in front of the gusset. At this time, the installer will ask the householder if he wants to install the range hood, if not, he doesn't need it.
-
Anonymous users2024-01-23The main bone (three eight bones) is one square meter with one meter. The accessory bone (triangular bone) is 1 square meter with 3 meters. This is the ratio of normal home improvement.
-
Anonymous users2024-01-22Is it to sell or install?
The side keel is generally fixed on the wall to play a stabilizing role, the main keel is the main stress point, connecting the boom and the auxiliary keel, and the top of the drop is generally fixed on the auxiliary keel. >>>More
With the triangular keel special hanger, generally made of aluminum alloy, the triangular keel and the main keel cross staggered tight, the hanger bent and stuck the main keel.
There is no formula, it should be calculated according to your installation design drawings, if there is a 30X60 electrical appliance, the auxiliary keel should be arranged according to its long side direction.
Light steel keel gypsum board ceiling spacing: 40CM indoors, 30CM outdoors (such as balconies). >>>More
Step 1: The elastic line of the groundwork.
According to the floor elevation level, use the ruler vertical vector to the ceiling design elevation, bounce on the roof on the keel position line, and bounce the elevation line of the roof on the wall. >>>More