What should I do if there are seams in the four corners of the aluminum beam of the integrated ceili

If the gap is small, you can put something between the aluminum beam and the wall to solve it, and there is no way to solve the large gap. The aluminum beam should be formed at one time, and the technical requirements are high.

Four corners, do I recommend looking for a carpenter? Then when he normally hangs the ceiling, he will hit the horizontal scale on the top, and then the position of Hengcheng directly falls off the top, and then why does he grind the corner flat if it is four corners?

There is no diagram, the exact situation is not clear. For the beam, the ceiling design can be used to cleverly hide the beam, and the overall appearance is beautiful and generous.

The manufacturer can only be reinstalled, and there is no other way to deal with the integrated ceiling.

Your so-called fan is not an arc, no matter what shape, use blockboard as the base, before the joinery is stapled, you should use a saw to cut out a small gap on the back before the joinery, but it can not be cut, such as 18 blockery, the depth of the incision is 15, the larger the arc, the smaller the gap spacing, so that you can bend out the arc you want, and then cover the gypsum board outside, if the arc is large, the gypsum board is easy to break, then you can soak the gypsum board with water, and the gypsum board can be scraped white when it dries. >>>More