-
Anonymous users2024-01-23Four corners, do I recommend looking for a carpenter? Then when he normally hangs the ceiling, he will hit the horizontal scale on the top, and then the position of Hengcheng directly falls off the top, and then why does he grind the corner flat if it is four corners?
-
Anonymous users2024-01-22There is no need to seal or touch the corner, just push it flat, if you really want to touch the corner, there is a flat closing strip.
-
Anonymous users2024-01-21The simplest is to use the 7-shaped line, hook it on the line, and the other economic way is to use the trimming machine to cut the groove on the back, directly fold 90 degrees, and there is a direct seal, and then use stainless steel to fold the 7-character, close!
It can be surface-mounted, surface-mounted spotlights, downlights are available, and the key is that the wiring needs to be slotted and buried on the top surface.
If the gap is small, you can put something between the aluminum beam and the wall to solve it, and there is no way to solve the large gap. The aluminum beam should be formed at one time, and the technical requirements are high.
What you say is strange!
The four corners don't move around or change. >>>More
The four corners must be consistent with the color of the ceiling, so that it will look good, otherwise the other colors will look particularly messy.
It is estimated that the foundation is out of shape or the material shrinkage and deformation of the ceiling. Do a good job of marking and continue to observe, if it continues to develop, find a property or material store to claim compensation.