-
Anonymous users2024-01-24Generally, when decorating the living room, lay laminate flooring, it is best to pave the door stone at the door of the bathroom, the door stone is a little higher than the bathroom (about 1 cm), the inner side of the door stone is better to grind the hypotenuse, and the floor should be as flat as the door stone. How much do you stay? Depending on how thick the floor you choose, if it's a 12mm floor, leave 15mm, if it's a 15mm floor, leave 18mm
-
Anonymous users2024-01-23The thickness of the wooden floor and tiles is generally the same, the ground will increase in height after the tiles, when laying the wooden floor, first lay a layer of base film, the thickness is about about, so there should be a slight difference between the two heights, you can consult the bricklayer, you will get a professional answer, haha.
Generally, there are doorstones under the door of the bathroom, which is so good-looking, with a wooden floor on one side and ceramic tiles on the other.
-
Anonymous users2024-01-22The floor of the living room is lower than the floor tiles of the bathroom, because the bathroom is a place where water is often used, therefore, the floor of the bathroom should be lower than the living room, so that the water will not flow into the living room.
-
Anonymous users2024-01-21The floor tiles are the same height as the floor. Threshold stones should be laid to prevent water overflow or seepage.
-
Anonymous users2024-01-20After paving, the floor in the living room should be as flat as the floor tiles in the bathroom.
-
Anonymous users2024-01-19Yes, the plasterer will use a horizontal pipe to find the highest point of the ground in your home, then use an ink fountain to play the line, and then use the mixed cement sand paddle to lay the cement sand paddle according to the bounced line. After the cement is dry, you can lay the floor tiles and wooden floors, but generally the floor tiles are laid first and then the wooden floors.
-
Anonymous users2024-01-18The floor in the living room is 2 cm higher than the floor tiles in the bathroom.
Hello, you're thinking the opposite. Generally speaking, the living room is more paved with floor tiles because the "flow of people" is more concentrated, and the floor tiles are more wear-resistant and easy to take care of (clean). In the bedroom, it is the opposite, there are usually more floors in the bedroom, and there are very few floor tiles.
If you want to be warm, you can use laminate flooring, and if you want to be durable, you can use floor tiles. In fact, it is still with the overall style, if it is a modern tile, it is a Chinese or simple wooden floor, and the decoration effect can be achieved by matching it.
It is recommended that you pave solid wood composite, atmospheric and high-end, because solid wood composite is generally a large board, paved with the atmosphere, Sentai floor newly launched European and American cold series of solid wood composite, you can take a look.
I saw a similar question in B&Q's micro-interview activities, and B&Q designers said that in this case, the only choice is to use silicone to fill the joint. Because the gap is too small to deal with, it is recommended that you find a decoration company to help you solve the problem.
Cement leveling is the best method, and nothing else is advisable, otherwise it will affect the foot feeling. At the same time, you can use a protective film to stick it on the wall to protect the wall, and then take it off when it is dry, which will not hurt the wall.