-
Anonymous users2024-01-24It's okay to be empty, and the toilet is calculated according to the distance, and it is generally not completely fit from the wall after installation.
Only pVC shifters can be used, but they are easy to block, and Taobao sells them.
If there is no way to replace it, then install a rubber strip under the door to make up for it!
Not suitable, the toilet is at most centimeters from the wall.
If the toilet with a 30 pit distance is installed 9cm away from the wall after the brick is pasted, it can be replaced with a toilet with a 40 pit spacing, and the diameter of the toilet drain nozzle is smaller than that of the toilet sewer pipe, which can be adjusted by moving the toilet forward appropriately.
About 5 centimeters, and the depth is almost 80 centimeters, such a large distance I don't think it's very good to use glue. It is recommended to find some wood strips or foam plugs on the inside, and then use the same wood blocks as you make furniture on the outside and paint them with the same paint. Make it as similar as the furniture and it won't make much difference.