How can the toilet face wash water without sewer flow directly to the squatting pit

Updated on Bathroom 2024-08-01
3 answers
  1. Anonymous users2024-01-24

    It is not feasible without a pipeline.

    In fact, it is very simple, as long as you go to the hardware store to buy a 50mm diameter PVC pipe, and then buy the corresponding number of elbows according to the path of the pipe, and glue them with PVC special glue. Other than that; It is best to install a P-bend at the washbasin to prevent odors from entering.

  2. Anonymous users2024-01-23

    For short-term use, the hose can be connected directly to the pit.

    Long-term use: toilet renovation, underwater construction.

  3. Anonymous users2024-01-22

    Although the upstairs method works, it is a bit difficult for the landlord. The hose directly under the basin leads to the urinal, which is easy to install and saves water.

Related questions
1 answers2024-08-01

Generally, the bathroom face faucet does not need to install a water purifier, unless the water source on your side is not clean.

1 answers2024-08-01

The electricity consumption is also limited, because the water heater is an insulated inner tank, and the heating stops at the set temperature, and when there is no hot water at night, it will automatically heat up again every few hours.

2 answers2024-08-01

First of all, the ventilation should be good, if there is no window, the exhaust fan should be turned on all the time, and you can light incense or bleed lemon peel or find a basin to get some water and spray some perfume into the water, so that the smell is fragrant.

1 answers2024-08-01

This can only be changed, find a professional housekeeping company, because it is a sewer pipe, so the shorter the maintenance time, the better.

5 answers2024-08-01

How do I get rid of odors in the bathroom?