The toilet is always full of water, and the water does not run down the sewer, what should I do?

Updated on Toilets 2024-08-01
3 answers
  1. Anonymous users2024-01-24

    In addition to the problem of finding the slope of the bathroom, there is also a problem with its elevation. Drained rooms should be 200mm lower than other rooms

  2. Anonymous users2024-01-23

    Big question. Wait for the master.

  3. Anonymous users2024-01-22

    This is why you didn't find a good level when you made the toilet, so it caused you to be like this, and you never pried it off.

Related questions
1 answers2024-08-01

If the sewer mouth is not blocked, the sewer is at a high level and can only be knocked out and redone.

3 answers2024-08-01

There is a blockage in the main pipe leading to your home below. Toilet flushing should not all go to the main pipe. Part of the flow goes back to the kitchen pipes. It needs to be dredged in order to solve this phenomenon.

2 answers2024-08-01

What to do if the toilet leads to the sewer and is knocked down? If it is broken, as long as it does not leak, there is no problem. Then just fix the broken spots.

2 answers2024-08-01

I don't know what is blocked, is it caused by too many oil stains inside? If so, you can use boiling water. Put some laundry, boil a large pot of boiling water, and pour it down the drain until it is clear. >>>More

1 answers2024-08-01

Which pipe is a five-pressure pipeline, generally there will not be too much scum, just use a wooden stick with a certain toughness and strength, bamboo poles are better, and fly swatters are on the line.