-
Anonymous users2024-01-241.The bathroom waterproofing made by the developer has basically been destroyed after the water and electricity renovation, so it is necessary to re-use the kitchen and bathroom waterproof slurry to do waterproofing.
2.After using waterproof paint for waterproofing, it is necessary to make a protective layer of mortar first, and then wait until the protective layer is completely dry before laying the tiles.
3.The current blue waterproof paint needs to be removed first, and then the cement base surface is exposed and then re-waterproofed.
-
Anonymous users2024-01-23In order to prevent the water flow of the toilet into the room, the toilet is lower than the indoor position; The bathroom will destroy the waterproofing made by the developer when the house is renovated in the later stage, and the quality of the materials used in the waterproofing made by the developer will not be very good.
The best waterproof construction step is to brush a waterproof coating on the basis of the waterproofing made by the original developer, and then fill it with cement mortar to paint two layers of waterproofing, which plays a double insurance role and fully prevents the damage to the waterproof layer caused by water leakage and foundation settlement.
The ground can be pasted directly. If the wall is not at ease, you can add 108 glue to the cement.
Whether it is a ventilation pipe or a sewer pipe or a sewage pipe, you have to figure out whether the pipe is a PVC pipe or a PPR pipe, if it is PVC, find a section of pipe with the same diameter (mainly for the curvature), cut a piece slightly larger than the gap and polish the notch outward with sandpaper, and then use sandpaper to polish off the smooth surface with sandpaper, and then apply it with PVC special adhesive, and then stick that piece on. If it is PPR, find a PPR tube in the same way, use fire or other heating methods, heat the edge of the notch and the inside of the piece to a microscopic state, and then paste it and press it for a while, I hope it can help you.
Very early on, the state has regulations that do not allow the use of asphalt as a waterproofing materialI think you're talking about polyurethane waterproofing materials 。But because it has a certain smell, it doesn't smell very good, so many friends don't want to use it when decorating their homes. But it's still great for waterproofing. >>>More
Before the wall tiles are pasted, quickly treat the waterproofing facilities before laying the underfloor heating and water pipes.
In order to prevent the water flow of the toilet into the room, the toilet is lower than the indoor position; The bathroom will destroy the waterproofing made by the developer when the house is renovated in the later stage, and the quality of the materials used in the waterproofing made by the developer will not be very good. >>>More