Floor drain problem, shower room problem

Updated on Shower room 2024-08-20
2 answers
  1. Anonymous users2024-01-24

    The floor drain is just opened under the bathing room for sewerage, and the overall bathing room has adjustment screws under the adjustment screws to adjust the height, and the ground is uneven, it seems that the smallest bathing room is also 900*900, and the cheapest 500 or so here in Zhengzhou can be bought. The shower room is still a good choice in winter, and if it is the kind of used water flushing toilet in the high box, it is also good.

  2. Anonymous users2024-01-23

    We can do 800*800, but will it be smaller, you can install a shower room to help you solve the current problem. Now the simple shower room is popular, you buy a good brand, the market to compare, it seems that "Juebai" is quite good.

Related questions
6 answers2024-08-20

You are afraid that these problems are the rights and interests of every consumer, generally speaking, you still go to the furniture city, there are many things in the bathroom, and now the glass is relatively strong, as long as you do not deliberately destroy it, there is no problem. Really, a small area of about 2200 can be solved.

4 answers2024-08-20

When people are showering, the splashing situation is based on the water pressure, usually the shower head sprays more than 20L of water per minute, while the water-saving nozzle only needs about 9L of water per minute, saving half of the water. According to the height of the user, the height is generally 2050-2300mm. The maximum distance is 1800mm with the user as the center of the circle

6 answers2024-08-20

The shower room is equipped with exhaust air throughout. If the pipe goes to the ceiling, wrap the pipe. Use a metal integrated ceiling package to choose a square tube with a color similar to the color of the bath. >>>More

4 answers2024-08-20

Do you have to have a whole shower room, and there is a shower room customized in the glass factory. >>>More

1 answers2024-08-20

Can't you change it, it's very likely that the small rubber head at the nozzle mouth loses its elasticity