-
Anonymous users2024-01-24You should be talking about the polyurethane waterproof material made by the developer, this material is not only not environmentally friendly when used indoors, but also has basically been destroyed when the renovation is carried out by water and electricity transformation, so it is necessary to eradicate all of it and redo it waterproof.
It is recommended to use kitchen and bathroom waterproof slurry to do waterproofing in the bathroom, first use the quick-setting repair mortar to repair and strengthen, and then use the permanent waterproof slurry to paint 2-3 times as a whole, and the thickness can be controlled in between.
Finally, after doing a good job of waterproofing, a 48-72 hour closed water test must be done to check whether there is any omission in the waterproof construction and whether the waterproof function is normal.
-
Anonymous users2024-01-23Black waterproof is certainly not an environmentally friendly material, the next time the owner brushes the waterproof, it is recommended to use environmentally friendly waterproof coating, it is recommended to use Datang red waterproof, zero formaldehyde!
-
Anonymous users2024-01-22It's okay to use waterproof putty to whiten it.
Yes. According to the general practice, it should be necessary to go through a 24-hour closed water test, and if it is determined that there is no water leakage, further construction can be carried out. 2 3 days time will not affect the quality of the waterproofing layer. >>>More
As long as an interface agent is used on the waterproofing layer, this cannot happen. What's more, after the tile is paved, each piece is restrained by each other, the lower part is supported by the ground, and the back is bonded with cement mortar, and it is impossible to collapse. >>>More
Two coatings for waterproofing toilets.
Nowadays, the materials used for waterproofing are generally paints, and asphalt-based waterproofing coatings are basically not used. Here are two coatings commonly used for waterproofing in the bathroom. >>>More
How high the bathroom waterproof brush is, there is no specific head. Some say that it is enough to return to the wall for thirty, some say one meter eight, and some even say that it is all brushed. Everyone is very confused, and they don't know who to listen to! >>>More
If you do waterproofing by yourself, you can use a small shovel or something to shovel it, but remember to clean and level the base surface again before waterproofing construction. >>>More