How to drench on the toilet bowl while perfectly suppressing the splash?

A smart toilet, it will not only not splash cheaply, but also help you clean. If you don't want to invest so much money, then press the flush button when you are about to pull it down, and the water will go down first and then go back, and the amount of water will be very small during this time, and the problem will be solved, but it is a bit of a waste of water resources.

Don't use too thin paper, throw it in and soak it in water. Don't use too thick paper, it's easy to clog the toilet, don't try the old-fashioned house, it may be clogged; There is also a point, it is a waste of paper towels, and a lot of paper towels are thrown in it every time, which is not environmentally friendly.

Change your sitting position. Try squatting on the edge of the toilet so that your butt will be raised and the possibility of splashing on your butt will be reduced. However, this scheme also has certain drawbacks.

If your toilet is not installed securely, then something terrible will happen. On the other hand, if you are using this method and you are bumped into by someone else, then it is really embarrassing.

This method is to install a foam device in the toilet, as long as you want to go to the toilet before pressing the switch, the toilet bowl is immediately covered with a layer of foam, when the poop falls, it can penetrate the foam, and the foam will be immediately closed, so that the splash can not splash, this method mainly needs to cost a relatively large amount, but the effect is good, and there is a cleaning effect.

The principle of a foam toilet is that it will automatically cover it with a layer of white and dense foam. The poop falls on it, there is enough buffer area, it is not easy to splash, and it can also lock in the smell, which can be said to be a great effect.

I have a cheap little shredder at home that shreds A5 size paper into small strips 2mm wide. Generally, after a few pieces, the accumulated debris can allow PP to enjoy a splash-free journey. To use, open the toilet lid and pour in the scraps of paper from the shredded paper.

At this time, you will see that the water surface of the toilet bowl is covered with a layer of small white confetti, as if it is covered with dense foam. Then you can poop. The paper scraps that are laid down have a certain resistance to falling stool, so you can gently hold them up and then slowly sink into the water.

A small thing that we often encounter in our daily life! When we go to the toilet tuba, we often get splashed with water! It's embarrassing!

The solution is yes, as long as we put 2-3 layers of paper on the water surface of the toilet bowl before we go to the toilet, some people ask why not one layer, because one layer of paper is too thin, maybe you haven't started yet, the paper has absorbed water and sank! Therefore, it is more appropriate to put 2-3 layers! It doesn't take too much!

I also encountered this problem when I was a child, but I easily got it, before it is convenient, first tear a piece of toilet paper, fold it according to the size of the water surface in your toilet and put it on the water surface, so that the poop gets a buffer when it enters the water, and it will not gradually come out!