-
Anonymous users2024-01-24Generally, the traditional carpentry union has a homemade steel awl, which is dented at the spot of the nail to be punched. Then you can use an electric drill to drill holes. There are also tri-pointed drill bits or regular drill bits sharpened.
If there is no awl, you can use a larger cement steel nail instead. It is also possible to use a hole opener to punch holes. The hole opener (cutter) is installed on an ordinary electric drill, and it is easy to cut round holes, square holes, triangular holes, straight lines, and curves on any curved surface such as the plane and spherical surface of various plates such as copper, iron, stainless steel, and plexiglass.
First of all, make sure that the wooden furniture is not damp. If it's wet, use a rag, hair dryer or heat gun to dry the furniture. When using a heat gun, keep it at a distance from furniture to avoid scorching marks or even fire. >>>More
If it's just a matter of hurting the paint, that's easy to solve! Just tinker with it! If you hurt the wood, it's easy to do! There is a painter who specializes in repairing finished paint at the place where it is sold! The wage is about 80-120 >>>More
Hello! We'll be happy to answer your questions. Wooden furniture is first sanded with coarse sandpaper several hail liters, then sanded with fine sandpaper, and finally polished with polishing sandpaper. Hope it helps.
1. Dust removal of soft cotton cloth is regularized.
Frequently use a soft cotton cloth to wipe off the dust on the surface of the furniture along the grain of the wood. Before dusting, dip some detergent on a soft cloth, do not wipe with a dry cloth, the dry cloth will wipe the surface of the furniture with flowers and wood. >>>More
If you don't have a paint, apply three primers (clear), then a base coat (the color you need), and finally a topcoat (clear).