-
Anonymous users2024-01-24How to measure the error, let's listen, the lathe factory will not have such a big error, unless you have a new tailstock assembly, such as the tailstock assembly, such as the tailstock does check whether there are foreign objects or dirt in each part of the tailstock, disassemble and clean the adjustment is still high, the bottom plate needs to be ground flat, but it must be professionally measured. The accuracy of the lathe is a very rigorous measurement. Inexperience, wrong means will be self-defeating.
-
Anonymous users2024-01-23What comes out of your car is a cone.
Both 6150 and C650 are dismantled from the back rocker. The mandrel is also pulled from the back.
Composition: 01 part: bed;
Part 02: Head of the bed; >>>More
The tailstock is basically marked on the Mohs scale, and you can know how many sizes it is by measuring the size.
Lathe tailstock adjustment chuck device: a bearing is installed between the hub core sleeve and the chuck hub sleeve, the adjusting chuck and the chuck hub sleeve are connected by chuck screws, the adjusting chuck is provided with a toggle pin, the hub core sleeve is provided with a hub root locking nut and a lock nail, and the chuck hub sleeve is provided with a locking screw and a pad.
There is a corresponding screw on each side of the bottom side of the tailstock. >>>More