-
Anonymous users2024-01-24This question of yours, now have the following questions:
1. You don't know how to lay the socket line when you are making the ceiling;
2. Or your ceiling line has been arranged, and now it is up to you to solve it, but you don't know the meaning of each line, so you don't know how to wire the socket;
Based on the above two cases, I give you the following two solutions::
The first problem, if you really don't know how to wiring, it is recommended that you still need to find an electrician to cooperate with the scene to solve it;
The second problem, if you are an electrician, but you are a later takeover, the early wiring is not your deal, it is recommended that you need to consult the previous electrician, which can solve many of your problems, if people are not willing to help you, it is recommended that you can use an electric pen to accurately judge the meaning of each line!!
-
Anonymous users2024-01-23Lead the wire from another socket and connect the socket, but install the open-wire socket.
-
Anonymous users2024-01-22It's all too simple to ask. Isn't it okay to enter a line of fire and go offline?
In the T-type connection, the wire that penetrates into the socket box is not cut, only a section of insulation is peeled off, and another wire is wrapped five times to lead out of the access socket. >>>More
If you can determine that the light and dark control knob is the live wire and the neutral wire, it is relatively better to connect it from there, and the disadvantage is that the socket panel should be connected to the ground wire, so as to meet the requirements of safe electricity use. If it is convenient, it is best to consult the property electrician. FYI.
How do you wire an outlet with a switch? A five-hole switch control socket, the wiring steps are explained one by one.
There are 3 terminals on the remaining side, if you control the spotlights in two different places, then the red connection is connected to the power live wire to the middle connector; The remaining two can be connected to the left and right ports. If the spotlight is not controlled in two different places, then connect the green and yellow ones together at the right terminal of the terminal port, and the red line is still in the middle position. Generally speaking, if your switch is not equipped with a socket, the neutral wire will not be led down, only the live wire and the control wire. >>>More
Electrical sockets are used to connect power to household appliances, and now every household has a variety of electrical appliances, and almost every house uses electrical appliances, so several electrical outlets need to be installed in each house. >>>More