-
Anonymous users2024-01-24If it's the top floor, go find the property.
If it's the middle floor, let you go upstairs to buy a bucket Oriental Yuhong or Sika brand waterproof material Brush the entire bathroom floor from the ground to the wall Brush 3 times I promise not to leak There are also toilet sewer pipes [PVC pipes in 12] and washbasin sewer pipes [PVC pipes in 5] should also be reversed After drying, it will be OK.
-
Anonymous users2024-01-23If you are on the top floor, you will find a property to deal with, generally with waterproofing membranes.
If you live on the middle level, ask your upstairs neighbor to buy a bucket of waterproof paint to paint.
--- Haoyang waterproof ---
-
Anonymous users2024-01-22When I moved, too, I had a few questions for you, number one: what type of house do you live in? Villa sex? A few floors, upstairs is occupied.
-
Anonymous users2024-01-21If you are on the top floor, use waterproofing membrane, and if you are in the middle, use waterproof paint.
I do it from the new side waterproofing.
1. To prevent water leakage in the bathroom, it is necessary to do a good job of waterproofing. >>>More
Do a good job of the base, usually the ground is a cement mortar surface, there are some special circumstances, such as the pipeline is not buried, the ground is uneven, so, the base should be smooth, the surface should be smoothed and calendered, solid, there shall be no hollowing, sanding, cracking and other phenomena, the moisture content of the base should meet the construction requirements of waterproof materials, not greater than 9. The flooding slope of the screed layer should be 2, and the slope of 5 (1 20) should be erased at the root of the pipe against the wall to avoid water accumulation here. Pipe roots and floor drains that protrude from the floor and walls. >>>More
How do you make a bathroom waterproof? Let's find out.
Bathroom waterproofing needs to be painted with waterproof paint twice, the first waterproof coating needs to ensure that it is firmly combined with the base layer, and then brush the second time after the first paint is dry, and then carry out a closed water experiment after completing the brushing, and observe that there is no leakage before it is completed. >>>More
Because after we finish the waterproof coating treatment, due to the influence of the waterproof coating, it is actually compared to the southern Xinjiang tiles pasted on the walls with waterproof treatment. If you want to smoothly paste the tile on the wall, it is recommended to use a special tile adhesive when choosing the adhesive material, because the tile adhesive will be easier to control than the ordinary cement mortar in use, and the adhesion strength is relatively sufficient, which can reduce the hollowing of the tile in the later stage to a certain extent.