-
Anonymous users2024-01-24How to choose solid wood flooring for home decoration?
Measure the moisture content.
The national standard stipulates that the moisture content of solid wood flooring is 8%-13%, and due to regional differences, the moisture content varies from place to place. Generally, there should be a moisture content tester in the dealer store of wood flooring, if there is none, it means that the moisture content is not paid attention to. When purchasing, the moisture content of the selected wood flooring in the exhibition hall is measured first, and then the moisture content of the solid wood floor of the same material and specification is measured unpackaged, if the difference is 2%, it can be considered qualified.
Observe the accuracy of the floor.
Generally, after unpacking the solid wood floor, you can take out about 10 pieces of freehand assembly, observe the tongue and mouth bite, assembly gap, and the height difference between adjacent boards.
Check for substrate defects.
First, check whether it is the same tree species, whether it is mixed, and whether the floor has defects such as dead joints, live joints, cracking, decay, and fungus. As for the color difference of the floor, because the solid wood floor is a natural wood product, there is objectively the phenomenon of color difference and uneven pattern, which is unavoidable. And laying solid wood flooring to feel the feeling of returning to nature, is in its natural color, pattern, if the excessive pursuit of the floor without color difference, is unreasonable, as long as the paving can be slightly adjusted.
Determine the appropriate length and width.
Solid wood flooring is not as long and wide as possible, it is recommended to choose a short and medium length floor, which is not easy to deform; Wooden floors that are too long and wide are relatively easy to deform.
Identify the type of flooring.
At present, the name of the tree species on the market is very confusing, due to the different growth environment of the wood, therefore, the material of the same tree species is slightly different, and the price of raw materials is not the same, but the material that is not imported is better than the domestic material. China's tree species are numerous, rich in resources, many areas of the tree species are good, the price is lower than the same kind of imported materials, some manufacturers in order to promote sales, the wood is named with a variety of wood science does not conform to the good name, such as: cherry, rosewood, gold does not change, jade sandalwood and other names; What's more, with low-grade high-grade wood, consumers must not be confused by the name, figure out the material, so as not to be deceived.
In fact, when buying wood flooring, it is best to buy it from a company with a good brand reputation and high reputation. Gerson flooring is determined to give you a healthy and beautiful home environment, respecting the concept of "living with wood, heart about nature", not only to manufacture cost-effective products, but also to provide more reassuring services, is a floor brand that everyone can choose with confidence.
-
Anonymous users2024-01-23First, look at the hardness.
The hardness of the floor is determined by its specific gravity. The harder it is, of course, the more wear-resistant. In general, the darker the color, the higher its hardness.
Second, look at the appearance.
It is better to have a uniform surface, consistent color and less tree nodules (eyes).
Third, look at the length.
The length of the wooden floor is generally of the same size. The longer the wooden floor, the easier it is to arch.
Fourth, look at the moisture content.
When choosing solid wood flooring, pay attention to the moisture content should not be too high, generally below 13.
Fifth, look at the material.
Nowadays, many operators use birch to pass off as cherry or maple, elm to pass off as ash, and Southeast Asian miscellaneous wood to pass off as imported rosewood, teak, beech, etc., so it is necessary to pay attention to the correct grade of the floor should be indicated on the purchase invoice.
Answer: Cost-effective, because the materials used in multi-layer laminate flooring are all logs, so the foot feel is the same as that of solid wood flooring, there is almost no difference, and it looks the same as solid wood flooring. The price is much cheaper than the solid wood floor, so it is very cost-effective.
1. Prepare before purchasing.
Before choosing wood flooring, the owner should first understand the orientation and area of the house, so that before buying wood flooring, a floor plan can be drawn for the master plan, as well as the use of each room. >>>More
Solid wood flooring is most afraid of moisture, direct sunlight and insect moth, so the primary condition of maintenance is to maintain the cleanliness of the floor, the floor can not have water stains, if you want to wipe with a damp cloth, you must wipe it with a dry cloth immediately, and you must ventilate it in the wet season to avoid mold; At the same time, the solid wood floor is also afraid of dryness, in the dry winter must maintain the humidity in the house, it is best to place a humidifier, not only can the floor not crack, but also make the air not dry, people feel comfortable. >>>More
Antique flooring is a wooden flooring surface that is specially processed into a classical style floor in the form of art. It originated in Europe and the United States in the 70s of the 20th century, and now people like American style. >>>More
The wood materials selected by multi-layer solid wood are general, depending on the firm bonding, no hollow core problem, and the price is not low when choosing environmentally friendly products. >>>More