-
Anonymous users2024-01-24No, unless the heating has been passed through a loose place in the tiles. Not really.
-
Anonymous users2024-01-23It's okay to blow it up, it's best to let the property send someone to repair it, the tiles are not solid, resulting in hollowing.
-
Anonymous users2024-01-22Electric pickaxe, the simple point is the impact drill (adjusted non-rotating state), generally now the construction is used with this tool, you can also use a cone or chisel along the side seam of the tile to chisel and then pour water inside, the next day you will find that the tile is a little loose, and then pry it down on it, I did this before, of course, you can also find a cement worker, about 200 fast on it.
There are usually two remedies for loose tiles.
The first is to use the grouting method, that is, to pour thin cement grout around the brick joint, and then gently knock the floor tiles to make it solid; >>>More
In the early stage of the completion of the floor tile paving in the living room, the owner should conduct a comprehensive inspection of the floor tile paving area, and use a small wooden hammer to knock on the floor tiles, and the loose floor tiles appear, and the knocking sound is relatively "empty" It is easier to judge whether the floor tiles are loose. The author suggests that the owner regularly inspect the paved floor tile area of the living room every once in a while, so as to find out whether there is a problem with the floor tiles and solve the problem in time.
Such a leak may have leaked from the upstairs floor bath, now that the weather has gradually warmed upstairs, and the upstairs is about to start bathing again, you have to go upstairs and urge them to check carefully and fix the leak.
Pro, buy small bags of sand, cement, tiles, plus labor costs, about 200 yuan.
It is estimated that the original air duct was dismantled and replaced, and the original air duct was replaced with a single-pipe one with a whistling sound.