-
Anonymous users2024-01-24Engineering:
1. The engineering design should be based on the principles of practicality, economy and reasonableness.
2. It is necessary to ensure that the technical indicators of EAS equipment are met, especially the installation distance indicators.
3. The distance between the EAS detection equipment and the decoder should be greater than .
4. It must be noted that the power supply line of EAS equipment must be separately drawn from the nearest box from the installation site, and other equipment cannot be shared on the power supply line.
5. It must be noted that there should be no large area of metal objects and 220V power cords (or other high-voltage lines) around the installation location of EAS equipment.
6. The design scheme should give priority to the online use of EAS equipment.
Installation standards: 1. After the EAS equipment arrives at the installation site, it should first be tested according to the position of the design plan.
2. After the test is successful, please locate the person in charge of the customer's project, including the location and distance of the EAS detector installation (within the index range), the confirmation of the installation position of the decoder and the unlocker, etc.
3. If there is interference in the on-site environment during the test operation, the cause of the interference should be found out first, and the solution should be determined before installing the fixed equipment.
4. After the installation position of EAS equipment is determined, mark the fixed hole of the equipment and the position of the groove required for embedding.
5. Use a percussion drill to punch 12 holes in the fixed hole position, and use a cutting machine to open a 10mm wide and 10mm deep groove (the depth of the groove can be used.
The reality is deepening).
6. After the above work is completed, put the EAS equipment in the installation position and connect it to fix it (the equipment is equipped with an expansion gong nail) Cover the floor groove (the equipment is equipped with a stainless steel bead) Fix the bead with white cement or glass glue and the ground level.
7. All wires must be shielded cables (including online cables and DC power cables).
8. When engineering construction, safety should be the first priority; The power supply must be disconnected to replace cutting discs, drill bits, etc.
9. All power cords and wiring must be fixed with line cards; If you need to wire, it must be soldered, and wrapped tightly with insulating tape, and the wiring part should be left outside the groove as much as possible.
10. The lock picker should be fixed in the position of the cashier that is convenient for the cashier to operate.
The anti-theft door has both anti-theft and security performance, and the biggest feature is strong security. All many corporate offices, financial offices, and banks use security doors. Nowadays, even ordinary houses are used to give their families a sense of security. >>>More
Just go to the Internet and search for a "wireless alarm", and change the alarm to an electronic lock. >>>More
1. Before the start of construction, we should first ensure that other indoor construction processes are basically completed, and the partition and movable door leaf must be uniformly laid out and positioned according to the requirements of the design drawing, and then determine the position of the door frame, and accurately measure the ground elevation and the top elevation of the door frame. >>>More
Quzhou Longyou range Xiaotian unlocking card may be demagnetized.
Hello, our company is Wudi Deli Lock Industry Co., Ltd., we produce electronic locks, fingerprint locks, bank vault doors and vault door locks and other products. Your Excellency asked me to tell me, now the market of advanced anti-theft doors do have electronic password and fingerprint and other functions of the anti-theft door, but their door panel and ordinary anti-theft door panel is no different, just installed an electronic lock and yourself, I suggest you still buy a set of fingerprint locks on the line, because the first procedure of the fingerprint lock is to confirm the fingertip line and then enter the electronic password and then open the anti-theft lock press is also convenient, to the street to find the kind of person who repairs the lock with the key to help you press on the line, you can also press, but people have all the tools, We may not be able to get it right with half a day's effort, but the master who repairs the lock can do it in three clicks or two. Our phone number is 0543--6366289 13562323898 >>>More