-
Anonymous users2024-01-24If it is a straight line reflective roof, it is calculated according to the area, the area refers to the bottom of the search surface plus (the size of the distance between the ceiling and the roof) and multiply the total length of the mountain to obtain the area of the ceiling, for example, the width of the ceiling is 40cm, 20cm down from the roof, the total length is 4m, then the area should be 60cmX4m = square.
-
Anonymous users2024-01-23Flattening: Multiply the depth of the bay What you call a rectangular top He has overlapping parts Counting the area is not much more.
-
Anonymous users2024-01-22The quotation is calculated according to the projection area, if you want to calculate the content or the material, you need to calculate the area and add the loss.
-
Anonymous users2024-01-21It's the same algorithm as the ground.
-
Anonymous users2024-01-20Count you to death by area. Now the prices have gone up so high. I didn't have a calculation of the ceiling at the time, and I roughly measured the total area, projection.
Then find the master to communicate the modeling, calculate the approximate amount of materials, estimate the total cost, and then pack it out. lest you ripped the scriptures. Special attention is paid to the quality and thickness of gypsum board, that is, the price of materials to be calculated, and other owners only mention that the construction quality requirements reach that level.
-
Anonymous users2024-01-19If it is a straight line reflective roof, it is calculated by area, the area refers to the bottom surface plus (the size of the distance between the ceiling and the roof) and then multiplied by the total length to obtain the area of the ceiling, for example, the width of the ceiling is 40cm, 20cm down from the roof, the total length is 4m, then the area should be 60cmX4m = squared.
View the original post
It can be calculated by projected area or by area. If it is a linear reflective roof, it is calculated by area, and the area refers to the bottom surface plus (the size of the distance between the ceiling and the roof) and then multiplied by the total length to obtain the area of the ceiling, and the area of the ceiling is calculated, in fact, it is the area of gypsum board, such as 20 square meters is 4 5, and the calculation method is 4 (square meters.
It can be calculated by projected area or by area. If it is a linear reflective roof, it is calculated by area, and the area refers to the bottom surface plus (the size of the distance between the ceiling and the roof) and then multiplied by the total length to obtain the area of the ceiling, and the area of the ceiling is calculated, in fact, it is the area of gypsum board, such as 20 square meters is 4 5, and the calculation method is 4 (square meters.
Normally, it is calculated in this way: one main keel, one auxiliary keel, and one square meter of gypsum board per square meter;
All are calculated according to the horizontal projection area, and the unit price of the downgrade shape and flat top is different.
To make a gypsum board ceiling, its clear height is to contain the thickness of gypsum board.