How to calculate the square meter of gypsum board ceiling

Normally, it is calculated in this way: one main keel, one auxiliary keel, and one square meter of gypsum board per square meter;

Gypsum board with its lightweight, fireproof, sound insulation and other excellent performance, is widely used in various types of interior decoration, at the same time, because of the inherent characteristics of gypsum board products, in the high temperature and rainy season after the construction of the ceiling deformation to the construction of the construction staff headaches, or decoration after one or two years, wavy deformation makes consumers feel very helpless. The deformation of gypsum board is caused by poor construction environment, cross construction, poor ventilation, no protection of product preservation at the construction site, and non-standard construction; on the other hand, the performance characteristics of gypsum board itself; First, the ordinary gypsum board city is long and empty, with large porosity, easy water absorption, and water absorption rate of more than 50%; Second, the softening coefficient of ordinary gypsum board is low, only left and right. >>>More

To make a gypsum board ceiling, its clear height is to contain the thickness of gypsum board.

Gypsum board, how to count the material of light steel keel ceiling >>>More

It can be calculated by projected area or by area. If it is a linear reflective roof, it is calculated by area, and the area refers to the bottom surface plus (the size of the distance between the ceiling and the roof) and then multiplied by the total length to obtain the area of the ceiling, and the area of the ceiling is calculated, in fact, it is the area of gypsum board, such as 20 square meters is 4 5, and the calculation method is 4 (square meters.