-
Anonymous users2024-01-241. Adjust the amount of water in the water tank, first push the buckle outward, then move the pontoon up and down, and finally jam the buckle, if it is not ideal, you can use a slotted screwdriver to rotate it, whether it is left-handed or right-handed, do not remember, as long as you see the float rising, you can improve the liquid level and increase the water storage, on the contrary, the float will fall, reduce the liquid level, reduce the water storage, and try several times until it is ideal.
2. Adjustment of drainage, the size of the water can be adjusted separately, the upward drainage is small, the downward drainage is large, the waste of water is too large, and the flushing is not clean if it is too small, so it is suitable until it is suitable. Hope you can adopt, thanks.
-
Anonymous users2024-01-23The toilet flush is controlled by a limit (float), and when the water in the tank rises to a certain position, the float that controls the water will automatically turn off the water supply. When you put bricks in the toilet, the water level in the tank will be raised, so that the float will reach the position where it can stop filling the water in advance, and the amount of water will be reduced a lot.
There is a flush float in the toilet, and the amount of water produced by adjusting the height of the aconite can be adjusted.
You open the lid and there's a float next to it, and you can adjust the vertical pole.
The water output is controlled by the middle one, you can use the big key to try the water output first, and then try the small key, if the installation is reversed at that time you just turn the button on the lid off the head, please adopt it.
You have to open the toilet lid, and then there will be a water level adjustment switch in it, and you can adjust it upwards. That is, a float switch, after the amount of water reached, it will turn off and enter the water.
Toilet accessories that can control the amount of water output should be installed, and different amounts of water can be flushed for stool and urine, which can save more than 50 water; For ordinary toilets without water-saving accessories, you can put 2 bricks in the water tank or bend the float rod down 15 degrees, which can reduce the water storage capacity of the water tank, thereby reducing the amount of water per flush; Do not pour cigarette ashes, leftovers, waste paper, etc. down the toilet bowl as it may take several times to flush them with water.