-
Anonymous users2024-01-24The wiring of the kitchen socket and the lighting wiring are controlled separately. First unplug the kettle to see if there is a reply button on your empty opening, and press it (a small square). It's time to recover.
If it doesn't work, there are two possibilities, 1. The capacity of the power cord you buried is not enough to cause a short circuit in the line, and you need to change the line. 2. Your empty opening capacity is not enough to burn out, replace it with a larger one.
-
Anonymous users2024-01-23It could be a kettle or something else plugged into an outlet with too much power! Or there is a short circuit in the power strip, it may also be a problem with the brake, or there is a leakage place, I hope it can help you!
-
Anonymous users2024-01-22Call an electrician for maintenance, it may be that the socket is damp or the line is short-circuited due to overload or the empty opening is broken.
-
Anonymous users2024-01-21It may be that water has entered the socket and there is a leakage phenomenon.
First remove the electrical appliances plugged into the socket, if you still can't close the switch, it is not a problem with the electrical appliances.
It can be the cause of water entering the socket.
-
Anonymous users2024-01-20Unplug all the connectors before sending them in.
-
Anonymous users2024-01-19Check the socket and get ready to replace one.
-
Anonymous users2024-01-18It may be that the socket has water ingress, and there is a leakage and seepage cavity.
First plug the electrical appliances plugged into the socket, if you can't close the switch, the round ridge is not a problem with the electrical appliances.
It can be the cause of water entering the socket.
In this case, it should be noted that there is a possibility of leakage in the socket. It may be that there is too much oil or that there is too much water. It is recommended to close the main gate during the day, and wipe the cover of the socket with a dry cloth after opening. >>>More
1.There may be short circuits in living room wiring, electrical appliances, wiring boards, etc. >>>More
It is possible that there is a short circuit between the socket or the wiring and the wall, resulting in leakage. The socket needs to be removed and checked one by one.
This is likely to be a short circuit in the wiring of this wind cabinet in your house. Or maybe it's overloaded with electricity.
It's strange to be able to send it, the socket is short-circuited, you still send the gate, it's too unsafe, turn off the main gate, and then disassemble the kitchen socket, wipe the water inside, and wait for the inside to be completely dry, and then send the gate.