-
Anonymous users2024-01-24It's cable TV, I don't know if you row the bright line or the dark line, if it's a bright line, you see there is a good clip, in the addition of a two-splitter, when you pay attention to the end of the line is the line, and then you connect the distributor, there is a word on the distributor (IN- is connected to the line).(OUT- There are two outlets) at the outlet end one is connected to the living room, one is connected to the bedroom on the second floor, if it is a dark line to put the cover down, under the inlet line on the cover to connect it to the distributor one to the face cover, the other to connect your second floor, you have to buy a two-distributor. Cable TV cable.
Cable TV dock.
-
Anonymous users2024-01-23You mean don't have a wired terminal board. Tell you that it's best to install this thing, or the TV will discharge, and some of the damage will be caused. The wiring is best embedded in the wall or ground planing under the trunking of the fine PVC pipeline with a diameter of 6 or 7 in the pipe, and the connection method is as follows:
The cable TV terminal board at the entrance end is removed and the line is exposed.
Use F to connect the cable TV splitter.
Assign the line to the living room The line to the bedroom.
Connecting the Terminal Board Connecting the Terminal Board.
-
Anonymous users2024-01-22If you don't have that hole, go to the bottom of the TV cable, fix it to the bottom with a white cable slot, and you can't see anything when you put it on the wall, or a similar color to a lower position, and if you put it on the roof, lie down and watch it all the time, you will be uncomfortable.
It is repaired by the local cable network company, and you can call 114 to check their phone number. But there is one thing that needs to be reminded, your problem should be a problem with the home line, not a problem with the external signal, it is estimated that even if they come to check, they will not repair it, because the embedded line at home will not be repaired by them.
Cable TV can probably go straight to the past, but the network cable can't. Either put a switch in the living room, and the bedroom network cable is led from this switch; Either use the four-wire connection method to connect the network cable, and divide the eight cores of the network cable into two strands and four cores, which are connected to the living room and bedroom.
Buy a 75 ohm cable coaxial cable, the length is the distance from the socket to the back of the TV. Measure it yourself, it's better to have a surplus.
It is especially suitable for watching TV in the living room and then want to continue watching in the bedroom or other rooms, it is very convenient to transfer the signal of the set-top box to the TV in the bedroom or other rooms to continue watching. The transponder can also be used for satellite TV receivers, DVD players and other audio-visual appliances.
There is a kind of cable TV signal transponder on the market, which is a kind of high-frequency broadband amplifier, which can transmit cable TV signals wirelessly at a certain distance, which is very suitable for you to use