The cable TV jack is in the living room, and the TV is placed in the bedroom, so there is no way to

Updated on Living room 2024-05-25
7 answers
  1. Anonymous users2024-01-24

    There is a kind of cable TV signal transponder on the market, which is a kind of high-frequency broadband amplifier, which can transmit cable TV signals wirelessly at a certain distance, which is very suitable for you to use

  2. Anonymous users2024-01-23

    It's very easy to do.

    You have the entire antenna end of the living room, which is sold in many places, and then install a wire on the TV antenna terminal, pay attention to the wire.

    You can see it, the effect is not bad, but it is not as good as the direct wire.

  3. Anonymous users2024-01-22

    With Malata cordless TVs, there are also devices that transmit wired signals wirelessly.

  4. Anonymous users2024-01-21

    Just pick up a pot on the balcony!

  5. Anonymous users2024-01-20

    Landlord, there is only one way to solve your problem, and that is:

    Rewire according to the technical requirements of the TV and your requirements.

  6. Anonymous users2024-01-19

    There is no way to do it anymore Putting a TV in the bedroom is harmful to health.

  7. Anonymous users2024-01-18

    There is a wireless receiver. However, it may not work well in different rooms.

Related questions
4 answers2024-05-25

It is repaired by the local cable network company, and you can call 114 to check their phone number. But there is one thing that needs to be reminded, your problem should be a problem with the home line, not a problem with the external signal, it is estimated that even if they come to check, they will not repair it, because the embedded line at home will not be repaired by them.

5 answers2024-05-25

Buy a 75 ohm cable coaxial cable, the length is the distance from the socket to the back of the TV. Measure it yourself, it's better to have a surplus.

5 answers2024-05-25

High-definition has nothing to do with whether there are snowflakes or not, it is a line problem, cable TV cannot be clear to every station, because what he sends is not high-definition films, so if you want to be high-definition, there is only digital TV.

4 answers2024-05-25

Find an electrician, there is also a set-top box that can only be used for one TV to receive cable TV, that TV can only receive 30-40 basic stations, if you want to watch cable in the bedroom, then you have to spend more than 100 to buy a set-top box.

2 answers2024-05-25

Is it caused by the interference caused by the LED light line being too close to the cable TV line? The current LED downlights are of poor quality, mainly the driver board of the LED lights. Judge whether your situation is a problem with LED lights, or a wiring problem, you can first remove all the LED lights, turn on the downlight switch, see if there is an impact, and then install them one by one, if there is no light on the TV, it is a problem with the wiring during decoration.