-
Anonymous users2024-01-23Is it caused by the interference caused by the LED light line being too close to the cable TV line? The current LED downlights are of poor quality, mainly the driver board of the LED lights. Judge whether your situation is a problem with LED lights, or a wiring problem, you can first remove all the LED lights, turn on the downlight switch, see if there is an impact, and then install them one by one, if there is no light on the TV, it is a problem with the wiring during decoration.
-
Anonymous users2024-01-22There's interference, and the website and the power cord come in through a pipe opening, but it doesn't turn on the light and disconnect the network.
It's not a problem to install these things,A floor speaker on the left and right of the TV,The center is placed on the TV cabinet under the TV,Surround it is placed on the walls on both sides of the sofa,The bracket is also placed on both sides,The subwoofer is placed on the left and the right,That thing is not directive,Projection,Look at the area of the living room 80 100 inches16:9 should be enough,Usually if you watch TV, buy an electric lifting curtain on the line,Put it down when you use it,When you watch TV, the sound goes up, For projectors, high-definition 2K (1920 1080 standard resolution), 1800 2000 lumens and contrast ratio of 10000 or more are enough. >>>More
Buy a 75 ohm cable coaxial cable, the length is the distance from the socket to the back of the TV. Measure it yourself, it's better to have a surplus.
As long as there is a closed route, you can use the top basin anywhere!
The cable between the set-top box and the TV, whether it is HDMI or AV cable (red, yellow and white), should not be too long, preferably within 3 meters, so it cannot be routed between rooms like a telephone line or LAN cable. >>>More
Of course this is possible, we all install it this way. The problem is that a set-top box can only be used on one TV, and this cannot be used for two TVs.