-
Anonymous users2024-01-24According to the requirements of CECS 196:2006 "Technical Regulations for Indoor Waterproofing Engineering in Buildings", "the walls of toilets and kitchens should be equipped with cast-in-place concrete flooding that is more than 150mm higher than the floor of the building", that is, the concrete flooding should be more than 150mm higher than the ground of the building.
1. The flashing height of all toilets is more than 150mm.
It is not possible to install square steel directly on the floor, because the bathroom has waterproof requirements. It is better to do the anti-beam, and install the square steel on the anti-beam. It can not only meet the waterproof requirements, but also meet the anti-corrosion requirements of square steel. See the building design code.
, 1800 in the wet area and 300 in the dry area, but the wall of the common wall with the room should also be 1800 (because the wall of the room will be made of wallpaper or wood veneer cabinet).
The first tile on the surface of the wall is removed, waterproof paint is applied, and the height of the waterproof layer is increased. >>>More
The supervision of Xiaomi's home decoration reminds you that the waterproof construction of the bathroom must be installed and implemented in the waterproof construction specification to reduce the trouble of water leakage and water seepage in the bathroom in the future. The waterproof height of the toilet can be determined according to the specific needs of the user. >>>More