-
Anonymous users2024-01-24It's good to buy an LED strip to connect to the light trough, simple and safe.
-
Anonymous users2024-01-231. Remove the lid of the light trough.
2. Change to an energy-saving lamp with high energy-saving wattage.
3. Buy a desk lamp.
4. Refer to the "Building Electrical Lighting Technology", how to improve the illumination of residential buildings.
-
Anonymous users2024-01-22Switching to a T5 lamp will make it much brighter.
Wait for two buckets of water to be flushed from a high place, charge under high water pressure, squat on the toilet, if it doesn't work, it will be repaired
You can try to use the wire to pass it yourself, if it doesn't work, you can put a yellow eel, because the yellow eel likes to make holes. If you really can't do it, you can only ask a pipe repair master to get it.
There are many commonly used methods:
1: Actually, you can find a half-inch wide bamboo strip and put it into the toilet to dredge it to solve the problem. >>>More
This is illegal and should never be done.
There are many ways to increase the amount of water, such as putting bottles in the water tank or adjusting the screw of the water inlet valve clockwise to make the water level rise Pay attention to the water at least 10mm away from the overflow pipe mouth of the drain valve If this is the case at the beginning, it is estimated that you have bought a siphon toilet, and because the hole spacing is not suitable, it has been displaced; Or there are two reverse bends, one for the toilet and one for the sewer pipe. If it is a slow flow from the water tank to the toilet, check whether there is something blocking the water outlet from the toilet tank to the flush. Adjust the water level of the tank appropriately.