-
Anonymous users2024-01-24It's too much work. Now the labor cost is so high, the gains outweigh the losses. Using CF-2000 cement-based permeable crystalline waterproofing agent is like touching the cement layer, and scraping and coating 3-5 mm thick on the ground like scraping putty can play a very good waterproof role.
It can also be used as a reinforcement of the hardening layer of the ground surface, under the action of moist moisture on the ground. The active substance and the hardened layer cement in the waterproofing agent are continuously activated and reacted to form a thicker permanent waterproofing layer. This material is easy to apply and affordable to cost.
Permanently waterproof. It can be carried out on the second day after the concrete is constructed, and the closed water test can be done within 3 hours after the construction. It can effectively improve the construction progress.
After draining water for an hour, you can directly attach tiles or pave wooden floors on it. We have more than 30 years of experience in the reinforcement construction of waterproof and leakage plugging structures, and provide free professional and technical consultation on concrete waterproof leakage repair, and introduce the performance of plugging materials. Eliminate the trouble of repairing today, leaking tomorrow, repairing every year, and leaking every year.
-
Anonymous users2024-01-23Polyethylene polypropylene membrane waterproofing can be used for bathroom floors and walls, because the membrane is full of solid sticky, no groove end treatment is required. This membrane is used for toilet waterproofing, pay attention to the following aspects:
1. The pasting and lapping of the coil must use polymer waterproof mortar or cement adhesive supporting the coil production plant.
2. The membrane waterproofing should be 250mm high on the walls around the bathroom.
3. More than 80% of the coils on the market do not meet the national standards, and the aging time is very short, please pay attention to the selection of good quality materials.
-
Anonymous users2024-01-22Then I suggest you go to I love my home to see, there are still a lot of articles on decoration information. It will definitely help you a lot.
Cement mortar toilet waterproof coating.
As one of the emerging waterproof materials, it is also rarely favored by consumers, in some building materials supermarkets, the salesperson may show you this material, and use it to brush a drain basket to make the drain basket become a basin to illustrate its waterproof effect. In fact, its material is a special adhesive (a bit like a special glue), which is mixed with fine cement and sand ash dust. >>>More
The configuration of waterproof cement mortar for toilets is as follows: >>>More
It is best to be protected with a layer of cement mortar of 2 cm. >>>More
If it is a waterproof coating, it should be sprinkled with some sand on the paint surface just after the construction of the waterproof coating to increase the roughness of the paint surface, so that it is easy to paste the tiles.
Hello! 1. In a humid environment, the wall is generally plastered with cement mortar, such as bathroom and kitchen. >>>More