Bathroom waterproof height

, 1800 in the wet area and 300 in the dry area, but the wall of the common wall with the room should also be 1800 (because the wall of the room will be made of wallpaper or wood veneer cabinet).

If you still make a bathroom, you generally have a height of meters. If it's just a simple bathroom, a height of 50 cm is enough.

In the acceptance specification, it is meters.

Wherever the water can splash, such as the shower, at least higher than the tallest person in your house! Hehe.

When decorating, we should waterproof the bathroom, so what is the waterproof height of the bathroom? Next, let PChouse give you a tribute to the travel answer.

The waterproof height of the bathroom is the national standard stipulated by the National Construction Committee, and the house has been built in the building waterproof, and the waterproof layer extends from the ground to the wall, which is 250MM higher than the ground. HOWEVER, THE BASIC WATERPROOF RIDGE OF THE WALL IS PURELY NONE, ACCORDING TO THE HEIGHT OF THE WATERPROOF LAYER OF THE CONVENTIONAL BATHROOM BY THE SHOWER HEAD WALL SHALL NOT BE LESS THAN 1800MM, AND THE GENERAL THICKNESS SHALL NOT BE LESS THAN, AND THE WATERPROOF PROJECT MUST BE COMPLETED FOR 24 HOURS WATER STORAGE EXPERIMENT.

Hello! The general decoration will make the bathroom waterproof to 20cm-30cm, in fact, in the bathroom without a shower, the water is easy to get to the wall. After years of accumulation, it is possible to cause another wall to resurge, and if that wall happens to be a wardrobe, it will cause a certain amount of damage.

In the long run, as well as in terms of quality, it is recommended to make the bathroom waterproof high.

Hope it helps

START AT 300MM HIGH ON ALL SIDES.

THE SHOWER AREA CAN BE HIGHER, GENERALLY 1500MM.

The higher the surrounding wall, the more difficult it is to paste the bricks, resulting in the hollowing of the bricks.

The waterproofing of the bathroom for the family is mainly for the root of the ground and the corner of the wall, because of the general tile pasting, so the waterproof height can be 600 above the ground is enough, if it is a dormitory and other large flow of people, it is recommended to do 1500mm.

The bathroom should be more than one meter eight, and now most of them choose to be full of brushes! The room is usually around 30 centimeters!!

Generally, the wall next to the bedroom or living room should be 1.5 meters.

1. Home decoration bathroom, the waterproof height is generally about the bathroom can be divided into dry and wet areas, the shower range is 180cm high, and the rest can be 50cm high.

2. Install the wall with hose shower head and the wall on both sides from 1800mm above the ground; The wall surface of the shower head installed with a concealed pipe and the wall surface on both sides of the shower head from above the ground should not be lower than the height of the shower head, and should not be less than 1800mm.

3. The wall in contact with the bathtub is 300mm from the ground to the top of the bathtub; The wall in contact with the washbasin is 300mm from the ground to the top of the washbasin; urinals 1800mm above the ground; Pipes that pass through the floor slab, 100mm above the root of the pipe.

The significance of waterproofing in the bathroom

Waterproofing the bathroom in the decoration process can ensure daily life, prevent the bathroom from leaking downstairs, and also prevent water from penetrating into the building, which can maintain the relationship between neighbors and the safety of the floor.

In general, the waterproof height of the shower area is at least 1800 mm, and the waterproof height of other walls is 500 mm. Bathroom waterproofing can ensure daily life, prevent the toilet from leaking downstairs, and also prevent water from penetrating into the building, which can maintain good neighbor relations and floor safety.

Toilet waterproofing practices

Here's how:

1. Use cement mortar on the ground to find a slope in the direction of floor drain, but the surface should be smooth. The slope near the entrance is small, and the slope near the floor drain is large.

2. The pipeline passes through the root of the floor slab and near the floor drain to strengthen the waterproofing. The pipe root building sealing paste is tightly sealed, and the cement is smoothed after the foot guard, and when the waterproof coating is brushed, the glass wire cloth is reinforced with 1 or 2 layers.

3. The wall is clean and flat, without floating ash and small particles, and the small original corner or slope angle is wiped at the junction of the wall and ground. When brushing waterproof coating, paste 1 2 layers of glass wire cloth reinforcement.

4. The total thickness of the polyurethane waterproof coating film is required to be more than millimeters. It can't be decided by the number of passes. The pipe root and the corner of the reinforcing layer are brushed first, and after the surface is dried at room temperature for 4h, then a large area is brushed and scraped. There shall be no leakage and bubbling. Brush a large area for 24 hours and then apply the next layer after curing.

6. The waterproof layer on the ground should be painted 300mm wide outside the door of the bathroom. The waterproof layer of the waterproof ground should be 200mm higher than the ground.

7. Do a 36-hour closed water test as required.

Bathroom waterproof height

1. Install with hose.

The wall of the shower head and the walls on both sides of it are 1800mm above the ground;

2. The wall surface of the shower head installed with a dark pipe (no hose) and the walls on both sides of the wall from above the ground should not be lower than the height of the shower head, and should not be less than 1800mm;

3. The wall in contact with the bathtub is 300mm from the ground to the top of the bathtub;

4. The wall in contact with the washbasin is 300mm from the ground to the top of the washbasin;

5. The urinal is 1800mm above the ground;

6. The pipe (including the casing) through the floor slab is 100mm above the root of the pipe.

About the bathroom waterproof height and bathroom waterproof practice is introduced here, bathroom waterproofing is very important for every household, I hope everyone can pay attention to it, so as not to add unnecessary worries to their own decoration.

1. The height of the waterproof layer in the wall, column and other parts (above the finished surface of the indoor ground) should not be less than 100mm;

2. Install the wall with hose shower head and the wall on both sides from 1800mm above the ground;

3. The wall surface of the shower head installed with a dark pipe (no hose) and the walls on both sides of the wall from above the ground should not be lower than the height of the shower head, and should not be less than 1800mm;

4. The wall in contact with the bathtub is 300mm above the top surface of the bathtub from the ground;

5. The wall in contact with the washbasin should be 300mm from the ground to the top of the washbasin;

6. The urinal is 1800mm above the ground;

7. The pipe (including the casing) through the floor slab is 100mm above the root of the pipe

The place of the shower should not be lower than the meter, and the other place should not be less than the meter, and it should be dried horizontally and then vertically.

It is recommended to achieve the height of the suspended ceiling.

The first tile on the surface of the wall is removed, waterproof paint is applied, and the height of the waterproof layer is increased.

The second more cost-effective way is to add waterproof plastic curtains to the surrounding walls, and open the curtains when taking a shower to cover the walls, so that the water will not be sprinkled on the wall, but the symptoms are not cured.

Third, buy an integrated shower room, buy it back and move it to the bathroom and reassemble it.

Remember to buy brand brand products for waterproof coatings, and the quality of Leibangshi is good.

Leibons suggests:

First, the bathroom wall has a large amount of water vapor and moisture attached to the wall during bathing. In the long run, it will penetrate into the back of the wall and damage the decorative materials. caused, shelling, mildew, discoloration of decorative materials, etc.

Therefore, it is recommended that it is best to brush to the top of the wall when doing waterproofing, and it is more scientific to brush at least to the left and right positions.

Second, if the height is not enough, you can generally brush it to a sufficient height. However, it is necessary to pay attention to the connection with the original waterproof layer.

In fact, you don't have to worry too much, the reason is simple: aren't you worried about water seepage on the wall when you take a bath? In fact, the water will flow down the tiles to the ground, and the occasional residual moisture will also dry, so you can't always take a shower 24 hours a day.

But if the ground is not waterproofed, then the problem is serious, because all the water will flow to the ground!

In addition, the wall of my bathroom is not waterproof at all, but even if I take a shower every two or three days, as long as I pay attention to ventilation, there is no problem.

There is a waterproof height for the bathroom, I still can't find the waterproof height for the bathroom, ask everywhere where there is a website to tell me to have a bathroom waterproof height of the URL, to have a bathroom waterproof height is very difficult to find, I really need to give a bathroom waterproof height now, really good, you can come to see, if anyone can find a waterproof height for the bathroom, just tell me to have a bathroom waterproof height URL, thank you for telling me to have a bathroom waterproof height, It's not easy to find a bathroom waterproof height, here to have a bathroom waterproof height, here to have a bathroom waterproof height, I still can't find a bathroom waterproof height, ask everywhere where there is a website to tell me to have a bathroom waterproof height of the URL, to have a bathroom waterproof height is very difficult to find, I really need to give a bathroom waterproof height now, if anyone can find a bathroom waterproof height, just tell me to have a bathroom waterproof height URL, thank you how, Tell me to have a bathroom waterproof height, it's not easy to find a bathroom waterproof height, thank you.

The waterproof height of the bathroom refers to the construction height of the wall waterproofing.

The normal height is 30-35 cm, and it is made around the lower part of the bathroom wall to connect with the ground waterproof. The main function of wall waterproofing is to avoid water flow from the unwaterproof part of the wall when the bathroom floor is flooded, causing the wall to be damp, and even leaking downstairs, because the water flows downward by gravity; The other is to avoid water splashing on the wall, seeping into the wall, and then seeping into the ground, causing water leakage or dampness on the wall.

The waterproof height of the bathroom shower area is meters, the construction is on the left and right sides of the shower area, if the ground is equipped with a platform, the waterproof height should increase the height of a platform, if the height of the family is relatively high, such as the height of Yao Ming, then the height of the waterproof shower area should also follow the height of the shower spray (nozzle), and the height should be slightly higher than the height of the family by 5-10 cm. The width is the same as the size of the shower area, the normal width on the left and right sides of the shower is 90 cm, if the shower area is larger, the width adaptability is relaxed, such as the length and width of the shower area, then the width of the wall waterproof is also the length of each meter on both sides.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose:?bdfc