-
Anonymous users2024-01-24The problem of water leakage in the bathroom partition wall is mostly caused by the leakage of the bathroom, so check the cause of the leakage first, and then deal with it
1. Find a professional hydropower worker to check whether the pipeline is ruptured and causes water leakage, etc., if it is a pipeline problem, it needs to be repaired in time.
repair pipes to solve water leakage problems;
2. If there is no problem with the pipeline, then consider that the waterproof layer is not done well and cause water leakage, if the local water leakage is serious, it is recommended to use the kitchen and bathroom waterproof slurry to do the waterproofing again, so as to fundamentally solve the problem of water leakage.
-
Anonymous users2024-01-23Of course, when taking a bath, the water gradually enters the wall and penetrates into the wall, and the part of the wall is not treated with waterproof and moisture-proof treatment, which will cause dampness.
There are no problems with the plumbing. It is caused by excessive water consumption at the shower, and of course, it is also related to the lack of waterproofing here. It is recommended to clean up the stagnant water in the bathroom immediately after bathing, and use a plastic sheet to block the shower under the wall when bathing, which can be improved. I hope my answer can help you.
It's broken, the rubber band inside is broken. Let's get a new one.
If you don't open the door, there will be a peculiar smell in the bathroom because of the long-term humidity, and the bathroom should have a window! You can open the window for ventilation, and if you don't open the door and window for a long time, there is no smell in the room, and you can communicate with your family well, and there will be no mosquitoes when the bathroom is dry.
It is necessary to find out the cause of the water leakage first, and then plug the leakage to be effective.
If only one of the outlets has this situation, that is, there are impurities inside the water pipe to this outlet, and it is no problem to put more water, and then clean and clean the faucet after dismantling, if it is like this, it may be the water quality problem of the whole building or your living area.