-
Anonymous users2024-01-24Most of the problems such as dampness, peeling, and water stains on the sanitary partition wall are caused by water leakage in the bathroom
1. Find a professional hydropower worker to check whether the pipeline is ruptured and causes water leakage, etc., if it is a pipeline problem, it is necessary to repair the pipeline in time to solve the water leakage problem;
2. If there is no problem with the pipeline, then it is considered that the waterproof layer is not done well and the water leakage is not done, if the local water leakage is serious, it is recommended to re-do the waterproofing with the kitchen and bathroom waterproof slurry, so as to fundamentally solve the problem.
-
Anonymous users2024-01-23Just renovated house, waterproof should be brushed in place, the wall is generally brushed to one meter eight high, if the wall is not brushed waterproof, the tile gap is not hooked in the place to hook, there is a transparent waterproof liquid on the market, brush twice. If it has been brushed waterproof, look at the water seepage wall, whether there is a faucet, or a water mixer with a shower. See if the water mixer or faucet and the water pipe outlet are not screwed properly, and the water seeps out of the wall at the interface along the water pipe groove.
Hope it can be adopted, thank you!
No, it is a natural phenomenon that small water droplets will accumulate in cold or hot air.
The dampness, peeling, and even water leakage of the sanitary partition wall are caused by the leakage of the bathroom, and now you need to find the cause of the leakage first: >>>More
The water seepage of the sanitary partition wall should first look at the height of the water seepage location, judge whether the wall waterproofing has been damaged, and whether it is necessary to redo the ground waterproofing, and then repair the wall after doing a good job of waterproofing treatment.
First, use a shovel to remove the moldy position of the wall, and then use 108 glue to brush to the position just now, and then apply putty again, and finally brush it directly with latex paint. If you don't know the steps of construction, you can call a decorator to help, explain these steps again, and the other party will know how to do it. >>>More
Leakage can be mitigated relatively temporarily, but it cannot be completely solved. It is best to start with the waterproofing of the bathroom and solve the problem thoroughly.