Can I use only plasterboard for ceiling ceilings?

1.Can you directly use gypsum board to make a large area of modeling ceiling?

First of all, I want to ask, how much is the floor height of the landlord's house, if it is not very high, there is no need for a large area of hanging flat, secondly, the general home decoration with gypsum board modeling ceiling is very normal, a large area can be used, generally with wooden keel, high-end hardcover residential or tooling using light steel keel is more frequent, but it is impossible not to use keel, just like building a building, no first floor is how to build the second floor, whether the landlord will not use the wooden keel to listen to the keel without keel.

2.If the top floor is bare ceiling, because you have to install lights or something, will it not be unsightly?

The top layer with the original ceiling layer must be repainted, the home wall paint is definitely to be redone, the top surface is also to be brushed, in addition to the regular decoration company will suggest that the homeowner to remove the original wall hydrophilic paint, that is, shovel the wall skin, if not removed, live for a few years, the new wall paint will bulge, crack or even peel off; And if you install lights, especially the installation of chandeliers and crystal lamps in the living room, it is best to install the original ceiling layer to be stable, if you want to install the ceiling ceiling layer, then you must keel reinforcement, so that there is no need.

3.If the above process is used, and then the wallpaper and niche are carved, will there be safety problems?

If the above process is according to the formal process of standard construction, there will be no problem, the landlord should remember to find a regular company do not look for outsourcing construction guerrillas, if there is a problem, you can not find anyone, especially the hydropower concealment project, this is particularly important, the regular company will issue hydropower backup drawings and 5-year warranty.

I hope my personal experience will be useful to you.

I agree with the home improvement company.

Bai suggested. For home improvement users like you, if the original ceiling is not flat enough, they will consider using plaster.

Plate leveling. right, but gypsum board needs to be used with a light steel keel, however, this will greatly reduce the height of your living room, so it is not recommended to use it. In fact, at present, many high-end hardcover residences are made of 20mm high modeling keel with thick ordinary paper gypsum board for ceiling leveling, and your home decoration is free.

Use the ceiling directly, it will not be unsightly, but also painted. It is also very beautiful with the surrounding modeling ceiling, but it is recommended that the lamp should be simple and atmospheric.

As long as it is installed properly, it is possible to use light steel keels instead of wooden keels, and there is no danger.

Suggested brands: Lafarge, Jackco, Knauf.

1.Can you directly use a large area of gypsum board to make a modeling ceiling? --No, keel is required.

dao2.If the top layer uses a bare version of the ceiling board, because you want to install a lamp or something, will it not be unsightly--"It is not beautiful.

3.If the above process is used, after the wallpaper, the niche carving, will there be safety problems--- no keel can not be hung on the top, the top can not be hung to talk about safety, the top is hung on what safety.