The sink and countertop in the kitchen are not fixed, which is particularly uncomfortable to use

Then your home should be made of countertop basins, and now the installation is glued with waterproof glass. You lift the basin up, clean the original glue, look at the contact point between your basin edge and the countertop, squeeze the glass glue evenly in that circle, and then put the basin on it, and wait until the glue is completely solidified before use, it is best to squeeze some glue around the basin edge after sticking, and scrape it evenly by hand, it will be firmer, and it will also prevent water from flowing into the kitchen from the unsealed gap, causing damage to the cabinet.

This is my experience over the years and I hope it can help you.

First wipe the countertop with a dry cloth, then use glass glue to put a circle of glass glue on the countertop (around the hole where the hole is dug), and then put it in the basin, and then fill the basin with water pressure for a day, which is very firm.

The best selective glass glue! Don't use acidic!

This question is often brought up for the simple reason that it is raised. It is because of the negligence of the overboard basin and the undercounter basin when learning the water basin. It seems that you have chosen the countertop basin, which is now made of glass glue, and it is impossible to handle it as stable as you imagined.

But you can ask the seller to see if you can dig a large point of your marble countertop and process it into an undercounter basin?? That will be stable.

Use strong glue and fixative, sold in hardware and building materials stores, 15 yuan per barrel, OK according to the instructions, absolutely firm.

It is more convenient to use glass glue, which can also be waterproof.

The basin side pad is glued with glass glue after the pad, and now it is like this.

Friend, my house is also a newly installed cabinet, that is, it is glued with glass very firmly, please rest assured to use it.

Generally use glass glue, or very firm, generally can not be sealed too dead, there is drainage under the pool, there is a faucet into the water, if the pool is broken, it is not easy to repair. Use the transparent kind of glass glue to look better.