One time there was no zero wire on the socket in the bathroom, and the wire was broken, so I connect

Updated on Bathroom 2024-08-31
4 answers
  1. Anonymous users2024-01-24

    There are definitely hidden dangers, if it is fine in other places, but in the bathroom, it will be very unsafe. So it is recommended that you fix it, if it is really difficult to repair, you can bring an outlet into the bathroom from somewhere else.

  2. Anonymous users2024-01-23

    Can't use, ah, if the surface of the appliance is not insulated, it will electrify, pay attention, 10 million.

  3. Anonymous users2024-01-22

    The purpose of some ground wires is mainly to prevent interference and improve the radiation efficiency of radio waves. If the wire is not grounded, there is an implicit safety hazard that may cause people to be electrocuted. And the ground wire is not necessarily connected to the true earth, but is often connected to one of the input power lines (usually the neutral wire), and its potential is not related to the earth potential.

    This is designed for the whole circuit, with a voltage of 0V on the ground wire, to unify the potential of the entire circuit.

  4. Anonymous users2024-01-21

    It can be used, but Jianyi still has to connect back to the zero line, and now if you connect it like this, it is equivalent to directly connecting the load to the protective ground, and there is no grounding protection.

Related questions
The bathroom socket wire, the ground wire and the neutral wire are connected in series, and as soon
1 answers2024-08-31

Disconnect the wires under the bathroom circuit breaker and measure the insulation of the L, N, and ground wires with a multimeter, and then open the sockets one by one to check.

Can the zero line of the socket be taken from the lamp The bathroom uses an electric water heater. A
4 answers2024-08-31

It's better to walk the root line alone.

The power you are talking about is relatively large, which is a large power consumer, and bath bombs and water heaters are more power-consuming. >>>More

There is no zero line for the bathroom socket, can it be shared with the zero line of another socket
3 answers2024-08-31

How can the socket not have a zero line? Lack of ground wire should be a common occurrence. The neutral line can be shared, but in the case of single-phase power supply, it should be considered whether the cross-section of the neutral line can ensure safety.

A wire was drawn from the zero line of the sanitary home socket, and a live wire was drawn out of th
4 answers2024-08-31

The working principle of the circuit breaker: the current of the phase line is equal to the return flow of the zero line, if it does not wait, it will trip, for example, a part of the electricity is taken from the ground when people are electrocuted, and the general bathroom of the building is set up with a separate circuit, that is, two circuits with the living room.

The switch in the bathroom, is there a zero line in the three wires, can it be changed to a switch w
2 answers2024-08-31

This cannot be guessed, and the instrument must be tested and confirmed.