-
Anonymous users2024-01-24One is that the light position can be moved in the direction of the threading pipe. Only in this direction to change the position, you need to try to find the conduit, open the conduit and pull the conduit out.
The other is: short-distance repositioning, percussion drill to open a small trench, and then the BV line into the wax pipe, bury it in the trench, gypsum leveling, the distance is too long is not suitable for this practice, the putty is easy to crack in the future.
1. The bathroom is not easy to peel the ceiling, it is recommended that if the situation allows, it is best to hang the ceiling, if the height is not enough, you can hang it close to the ceiling, and then wrap the sewer pipe in a box, so that the space is relatively high. If you don't do it, the sewer pipes are now made of PVC, which is easy to pollute after a long time, and the flushing sound is loud. >>>More
The wires are generally drawn first, embedded in the floor slab, and cannot be seen. If you don't have a ceiling for wiring later, you can only dig out the path of the line from the wall and floor slab, and then plaster the wire after laying it!
Are you trying to ask, can you install a ceiling without a suspended ceiling? >>>More
The ceiling is good, but don't hang that kind of gypsum board, it is easy to fall after absorbing water.
Don't blindly follow the trend and don't install the ceiling, anyway, I think it's much better to install the ceiling than not to install the ceiling, after I installed the AIA integrated ceiling, I never worried about the ceiling, I have time to wipe it clean, no need to spend money to buy detergent, and the moisture-proof ability is good, not easy to crack and fall off.