I do floor heating in my house, when is it better to do waterproofing in the bathroom?

Updated on Bathroom 2024-08-20
5 answers
  1. Anonymous users2024-01-24

    The waterproofing project of the bathroom is the place where the current home decoration is more prone to problems, and special attention should be paid to the "sensitive areas" in these home decorations. At present, there are many kinds of materials used for waterproofing in toilets, and basically the waterproof effect is good, but it is necessary to pay attention to the specific construction details.

    Flattening the floorIf you want to replace the floor tiles in the bathroom, after chiseling off the original floor tiles, first flatten the floor with cement mortar, and then do waterproofing. This avoids leakage of the waterproofing coating due to uneven thickness. The joints between the walls and floors of the bathroom and the joints between the water and water pipes and the floor are the most problematic areas.

    During construction, the joints should be painted in place. In the waterproofing treatment of the general bathroom, the wall is also coated with a waterproof paint about 30cm thick to prevent water from penetrating the wall. If you use two screens, the two walls that are connected should also be painted.

    If you use a bathtub in your home, the wall adjacent to the bathtub should also have a higher height of the waterproof paint than the top edge of the bathtub.

    After the construction of the toilet is completed, all the sewers of the toilet are blocked, and a 25cm thick "threshold" is built at the door, and then 20cm high water is poured into the bathroom. After 24 hours, you will check the surrounding walls and floors for leaks.

  2. Anonymous users2024-01-23

    Generally, it is better to do waterproofing before laying floor heating, and it can be constructed according to the actual situation

    The waterproofing of the bathroom should be in accordance with national regulations, and the wall should be returned to the height of the meter

  3. Anonymous users2024-01-22

    Of course I did it before... Because it's not easy to dew, it's easy to do...

  4. Anonymous users2024-01-21

    Agree with the statement above, and it is also recommended to use K11 or JS waterproof coatings. Good brands are Degao, Nenggao, Henkel, etc., it is recommended to use high green waterproof, the effect is really good, but it seems to be out of stock, not very easy to buy.

  5. Anonymous users2024-01-20

    Do waterproof first and then lay floor heating

Related questions
The bathroom is made of floor heating and waterproofing several times
1 answers2024-08-20

Do it before floor heating, do it again after floor heating, if the bathroom does not do dry and wet partitions, it is generally not recommended to do floor heating.

Bathroom floor heating, how to do waterproofing
3 answers2024-08-20

The following steps need to be considered for floor heating and waterproofing in the bathroom: >>>More

Do you do waterproofing or underfloor heating in the bathroom first?
15 answers2024-08-20

Do you do waterproofing or underfloor heating in the bathroom first? >>>More

Do you do waterproof in the bathroom before doing underfloor heating?
2 answers2024-08-20

Do you do waterproof in the bathroom before doing underfloor heating?Floor heating is waterproofed once before, waterproofed once after backfilling, a must. Otherwise, it will be very troublesome to have problems in the later stage >>>More

How to do underfloor heating in the bathroom waterproof
3 answers2024-08-20

If you plan to have underfloor heating in the bathroom, you should generally apply a layer of waterproof paint before doing underfloor heating. This construction operation is mainly considered from two aspects: first, the geothermal pipe leaks and will not leak downstairs; The second is that waterproof paint is a chemical substance, and if it is brushed on the geothermal heat, there will be a smell when it is heated in winter. >>>More