How to waterproof the invisible door of the bathroom

What should I pay attention to when waterproofing my bathroom?

The waterproofing project of the bathroom is the place where the current home decoration is more prone to problems, and special attention should be paid to the "sensitive areas" in these home decorations. At present, there are many kinds of materials used for waterproofing in toilets, and basically the waterproof effect is good, but it is necessary to pay attention to the specific construction details.

Flattening the floorIf you want to replace the floor tiles in the bathroom, after chiseling off the original floor tiles, first flatten the floor with cement mortar, and then do waterproofing. This avoids leakage of the waterproofing coating due to uneven thickness. The joints between the walls and floors of the bathroom and the joints between the water and water pipes and the floor are the most problematic areas.

During construction, the joints should be painted in place. In the waterproofing treatment of the general bathroom, the wall is also coated with a waterproof paint about 30cm thick to prevent water from penetrating the wall. If you use two screens, the two walls that are connected should also be painted.

If you use a bathtub in your home, the wall adjacent to the bathtub should also have a higher height of the waterproof paint than the top edge of the bathtub.

After the construction of the toilet is completed, all the sewers of the toilet are blocked, and a 25cm thick "threshold" is built at the door, and then 20cm high water is poured into the bathroom. After 24 hours, you will check the surrounding walls and floors for leaks.

The invisible door is still waterproof, you can see the reference materials for details.