-
Anonymous users2024-01-24The float and the piston of the toilet are not connected together, the float is used to control the water intake, and the piston is used to drain the water, so the piston must be connected to the drain button on the outside of the toilet tank to function.
-
Anonymous users2024-01-23Change the inlet valve, if you don't get it right, the waste of water is enough for you to buy a few.
How to adjust the toilet float - situation 1: If you want to lower the water level in the pit, open the water inlet valve on the left side of the water tank cover and have 1 thin leather pipe called the water supply pipe, which is generally inserted into the drainage valve on the right, and pull the right side up directly in the water tank, so that the water in the pit will not be too high when the water enters the water next time. >>>More
The bottom blue one is the float, and there is a white dot in the upper right corner of the float. >>>More
Tie it up with a rope and you can continue to use it. Otherwise, go outside and buy a water piece and put it on.
Install a pressure reducing switch in front of the water inlet hose and turn it off.
This is very difficult to install, you follow the silk head, if it doesn't work, buy the whole set again, and let the small shop owner install it for you.