-
Anonymous users2024-01-24It is recommended that you check the float valve and drain plug in the toilet tank, both of which will cause water to enter. Once you've figured out what's wrong, repair or replace it.
Generally, the inlet valve is broken. In addition, if the flush valve is not reset, the water level will not rise due to water leakage, and the water will not stop. FYI.
The toilet inlet valve is not only water, but the mud and sand in the pipe may be stuck in the sealing ring, you can use your hand to move the float valve up and down to let the water wash away the mud and sand, and you can also adjust the float lower, which can lower the water level.
It may be that the rubber is worn or aged. Generally, it is dismantled and replaced with a water inlet valve. Fortunately, most of the inlet valves are now used by Tongbi for a long time, and it is not complicated to change one. FYI. (The picture quotes Travel Hui Wei from the picture).
1. Close the inlet angle valve; Take out the water-stop cover of the falling water part and check whether it is deformed, aged or has foreign objects adhered; Wash or replace the water-stop cap. >>>More
Stuck: Check whether the float or float of the inlet valve is stuck, and you can pull the float (float) up and down with your hands, and it can generally move up and down smoothly. >>>More