-
Anonymous users2024-01-24Hanging, because most of the cabinets made on site are connected with air nails, the air compressor has almost no nails and air nails are booked into the woodworking board, and the process of separating it will inevitably be destroyed, so you'd better send a photo of the cabinet to help you solve it at the lowest cost.
-
Anonymous users2024-01-23Don't damage don't want to be too realistic, you send a picture to me to see, give you a plan.
-
Anonymous users2024-01-22To look at it specifically, the current carpentry is the so-called nail carpentry, and the method is glue + nails. If it is made of glue, be careful, it is generally not easy to open; There are not many cases without glue, generally lazy, only fixed with nails, and then nailed up with a nail gun, which you can slowly disassemble. If it is a plate structure, which is connected and fixed with hardware, it is easy to do, and it can be disassembled directly.
It is best not to dismantle, the furniture has been deformed for a long time, some of the wood will be deformed, can be dismantled but can not be pressed, and when making furniture, the carpenter will brush white latex on the connecting tenon, so that the connection is more powerful, but the tenon will be destroyed when dismantling, and it is difficult to install and not solid.
I didn't figure out the relationship between the lamp and the cover, but when installing the lamp, I must first do the aluminum-plastic panel ceiling, and then reserve the position of the lamp, so it is recommended that the questioner should not rush to pry the aluminum-plastic panel off, which is a destructive action, and then it will cause the original lamp to be replaced, and the result is to renovate the entire ceiling again. >>>More
Either your family paints twice more than your neighbor once, or he reports more kickbacks!
It depends on what kind of furniture it is, mainly not because there is formaldehyde in the wood, but because the formaldehyde content in the layer of paint brushed on the surface of the furniture is high after the furniture is done, so it is best to let it ventilate for 3 months. Or use these methods, formaldehyde is dissolved in water, and two basins of cold salt water can be placed indoors, and the smell of lacquer can be removed in one to two days. Soaking onions in a pot can also remove odors such as paint after decoration. >>>More
Go to a custom furniture store you know and ask them for some lock stickers to stick to the holes you mentioned.