-
Anonymous users2024-01-24Loosen the middle screw, then pull the lock outward, and then tighten the screw.
-
Anonymous users2024-01-23The latch is placed inside the plate, not inlaid into it.
The lock of the assembled furniture is a part of the three-in-one, that is, the lock, the screw, and the rubber particles.
When producing furniture, the master calculates the size, drills a 10 mm diameter and 12 mm deep rubber grain hole on the connecting plate through the machine, drills the screw hole on the side of the connected plate, and drills the lock hole on the front of the screw hole.
At the time of delivery, the master punches the rubber particles into the rubber grain holes.
When installing the furniture, the master rotates the screw into the rubber particles, splices the two plates together, stuffs the lock into the lock hole, and rotates the lock with a screwdriver until it is tightened.
When dismantling furniture, you can separate the furniture by rotating the screwdriver in the opposite direction.
What kind of lock? If you can't tell, is there a picture? >>>More
The latch is placed inside the plate, not inlaid into it. The lock of the assembled furniture is a part of the three-in-one, that is, the lock, the screw, and the rubber particles. >>>More
A latch is an object that is used to fasten two items. Lock generally refers to the buckle fastener installed on the door and window for locking the door and window, generally composed of the movable part and the fixed part, through the combination and separation of the movable part and the fixed part to achieve the closing and opening of the door and window, the new generation of Nahui lock installation procedure is simple, easy to use, safe, firm, anti-vibration, strong fastening, can be repeatedly closed and opened for use countless times. There are many types of locks, and they are used in a wide range of applications. >>>More
Zinc alloyZinc alloy is an alloy composed of other elements based on zinc. Commonly added alloying elements include aluminum, copper, magnesium, cadmium, lead, titanium and other low-temperature zinc alloys. Zinc alloy has low melting point, good fluidity, fusible welding, brazing and plastic processing, corrosion resistance in the atmosphere, and residual waste is easy to recover and remelt; However, the creep strength is low, and it is easy to cause dimensional changes due to natural aging. >>>More
It should be better than the locked solid wood floor, the quality is more stable, and it is not easy to deform.