Is there a clamp installed on the top of the domestic sewage riser in the residential kitchen and ba

Updated on Kitchen 2024-08-20

1 answers

Anonymous users2024-01-24

Generally, the toilet sewer pipe is a PVC pipe, which is connected with a straight plug and glue, and there is no clamp installation.

Related questions

Does the discharge of toilet sewage from the kitchen drain riser affect the hygiene of the kitchen?

9 answers2024-08-20

If it does not affect, do a good job of the drainage pipe of the kitchen sink S bend is not blocked, and the S bend is fine if the water is stored normally, and it is anti-odor.

What causes infrequent water seepage above restroom risers?

3 answers2024-08-20

It should be that the waterproofing upstairs is not done thoroughly, the only solution is to do the work from above, the following is not good, generally there are gaps in the pipe wall and pouring layer, and the upstairs waterproofing is not caused by the position of the pipe wall with waterproof materials, you can use quick-setting cement to go upstairs to water around the pipe wall, it should be better.

There is a writing on the pvc toilet riser what glue can be glued without leakage

2 answers2024-08-20

With glue for exclusive use of PVC. It's best to make a material that is the same as the riser. Glued to that hole. Do not use glass glue. Toilet effluent is corrosive. Glass glue is not good.

Is it OK to use PVC light wall pipe for toilet sewage riser?

1 answers2024-08-20

Yes, it is noisy. It should not be used near the dormitory. Hospital wards, nursing homes, should not be used.

Is there a 50 cm distance between the toilet sewage and the water supply standpipe?

2 answers2024-08-20

There is no such rule, and it is not realistic.