Why the balcony tiles are falling off

Because of the high grade of decoration now, many owners mostly choose vitrified tiles or antique tiles with larger area and smoother surface when choosing tiles. With the development of higher strength, better wear resistance, larger size and lower water absorption in the ceramic tile industry, coupled with the continuous emergence of many new wall materials, as well as the popular decoration trend of larger specifications of floor tiles on the wall, higher requirements have been put forward for the ceramic tile paving process.

The traditional way of sticking ceramic tiles is mainly cement mortar pasting, cement mortar does not have viscosity, its main principle is that cement mortar penetrates into the porcelain servant and brick capillaries, and the condensation hardening plays a mechanical inlay fixing role similar to the key inserted into the lock hole, and the tile and the substrate are bonded, and its bonding strength depends on the void rate of the substrate and the water absorption rate of the tile, so under the trend of declining water absorption rate of the tile, the tile is very easy to appear hollow drum falling off. It is imperative to upgrade the ceramic tile paving process.

The thermal expansion and contraction of the balcony is very serious, and the cement and ceramic tiles belong to two different materials, and it is easy to separate and fall off under the thermal expansion and cold contraction, which seriously threatens the safety of the owner.

Now the effective solution to this problem on the market is Loubang strong tile adhesive, perfect and laugh to solve this problem. And it is underwritten by Tailao Peng Ping Yang Insurance Company.

The main reason for the tile falling off is that the adhesive material is not sufficient, the brick is not soaked enough, and the base treatment is not clean. Generally, mortar should be used, and it should be necessary to pay attention to its workability, not too dry, nor too thin; Some dust, dirt, oil, etc. of the base should be cleaned up, and the base layer of plastering should be smashed; Attention should also be paid to the treatment of the gaps, often some harmful substances enter from the gaps to destroy the internal adhesive materials.

This should be because of the relationship between the insulation layer of your balcony, or the reason why you did not treat or did not deal with the insulation layer when you inlaid the bricks.

The main thing is that the foundation is not well handled during construction, or the cement label is not enough, and the nature of your tiles is related, and the construction is not well mastered, such as whether there is water at that time.

1. Whether the tile is soaked before paving, if the tile is not soaked, the tile is easy to compete for the moisture of the mortar after paving, causing it to fall off.

2. Whether the substrate is cleaned.

3. Whether the tile is sprinkled with interface agent before paving.

3. Whether the mortar ash number meets the requirements of paving.

It has to do with the weather, or the quality of the tiles.

After sunshine, the thermal expansion and contraction coefficient of the wall and the tile are different, which leads to the tile falling off.