-
Anonymous users2024-01-24Hello, acid glass glue can be completely cured in 24 hours, and neutral glass glue cures slightly slower, generally about 48 hours. If you don't know what kind of glue you can smell close to the glue part, the acid glass glue has a large pungent sour smell. In addition, acid glass glue is generally used for edge banding and waterproof treatment.
It is also necessary to remind you that glass glue will volatilize pungent odors and some harmful gases during the curing process, and it is better to pay attention to ventilation in closed spaces such as toilets, and it is best to open doors and windows to increase air flow. Wait for the glass glue to be completely cured and there is no obvious odor before using it.
Glass glue, a commonly used adhesive in the household, is composed of sodium silicate (Na2O·mSiO2) and acetic acid and organic silicone. Sodium silicate is soluble in water and viscous, and is called water glass in the south and bubble alkali in the north.
Glass glue is a material that bonds and seals various types of glass with other substrates. There are two main categories: silicone glue and polyurethane glue (PU).
Silicone glue sealant - is what we usually call glass glue, and is divided into two kinds of acidic and neutral glue (neutral glue is divided into: stone sealant, mildew sealant, fireproof sealant, pipe sealant, etc.).
Glass glue is divided into two types according to its performance: neutral glass glue and acid glass glue. It is generally used for home improvement bonding.
The places where glass glue is generally used in home decoration are: the dumb place on the back of the wood line, sanitary ware, toilet, makeup mirror in the bathroom, the gap between the sink and the wall, etc., these places should use glass glue with different properties. The adhesive of neutral glass adhesive is relatively weak, and it is generally used on the back of the bathroom mirror where there is no strong adhesion.
Neutral glass glue is used more in home decoration, mainly because it does not corrode objects, while acid glass glue is generally used in the dumb part of the back of the wood line, and the adhesion is very strong.
-
Anonymous users2024-01-23Kiss glass glue is mainly used to seal the gap, this suggestion you still have to wait for the glass glue to be completely dry in use, some are dry, not completely dry, not completely dry when the use will have an impact, the general sealing glass glue in about 2 days will be almost completely dry, used before the royal craftsman is like this, I don't know what type of kiss you use, in short, I hope to help you.
-
Anonymous users2024-01-22First of all, we should determine the installation position of the toilet, and then glue the glass to the position, and then install the toilet on it, and then we can choose more environmentally friendly materials for the toilet glass glue, which is very beneficial to our safety.
Generally, it takes at least 8 hours to sit, and you have to be careful when sitting, so long the surface of the glass glue can be dry, but it is best to wait 48 hours to dry thoroughly, so that the glass glue can exert the maximum adhesive ability.
The glass glue in the bathroom will dry in about 24 hours. >>>More
Put the rubber ring in the middle of the toilet outlet and the sewer, connect the water pipe, clean the ground in front of the toilet, and after installing it, glue it on the seam between the toilet bowl and the ground, and after 24 hours, the glue is dry in the test water adoption.
It should be dozens of minutes to wait for the glue to cool.
The squatting toilet is different from the toilet, the squatting pit should wait for the cement to dry and the squatting toilet is fixed before it can be used, while the toilet can be used after the installation and commissioning of the pipeline. If you are conservative, you can wait for the sealer to dry before use, so as to avoid the toilet shifting.