-
Anonymous users2024-01-24Put the rubber ring in the middle of the toilet outlet and the sewer, connect the water pipe, clean the ground in front of the toilet, and after installing it, glue it on the seam between the toilet bowl and the ground, and after 24 hours, the glue is dry in the test water adoption.
It is recommended to use neutral silicone glue, which has no odor and good adhesion. For all glass adhesives, the general curing time is about 24 hours. The better quality ones are faster.
How to remove glass glue.
The removal of glass glue depends on whether the glass glue has been cured or not >>>More
I think the toilet is best installed with cement, and the glass glue is always not too old.
Generally, it takes at least 8 hours to sit, and you have to be careful when sitting, so long the surface of the glass glue can be dry, but it is best to wait 48 hours to dry thoroughly, so that the glass glue can exert the maximum adhesive ability.
Glass glue is an organic matter, and after bonding, it can be broken with a paper cutter or disassembled with less fire.