-
Anonymous users2024-01-24Yes, the solid wood floor is made of wood processing from the bottom to the surface, and it is easy to be affected by the environment, weather and other factors for long-term use, and there is a damp situation. Therefore, the installation of solid wood flooring requires a moisture-proof film.
1 Use a semi-dry mop when cleaning. If the air in your home is dry, make the mop wetter or put a basin of water on the heater or humidify it with a humidifier.
2 After laying, wax in time. In the usual process of use, waxing every 3 months is sufficient. In fact, it is okay not to beat, but frequent waxing can maintain the finish of the floor and prolong the service life of the solid wood floor.
3. Try to avoid the wooden floor from contact with a large amount of water; Avoid wiping with acidic and alkaline liquids to avoid damaging the finish of the floor surface paint.
4 Avoid sharp objects scratching the ground, do not throw cigarette butts or directly place things that are too hot on the floor, and try to avoid dragging heavy furniture.
5. During the use of the floor, if it is found that the individual floor is shelled or falling off, the floor should be picked up in time, the old glue and ash should be removed, and the new glue should be applied and compacted. Waxing once a month is also the best way to maintain it, but wipe off moisture and stains before waxing.
-
Anonymous users2024-01-23Solid wood flooring has been used for a long time, affected by weather factors, and is easy to get damp, so it is best to lay it!
-
Anonymous users2024-01-22Is it a hardwood floor? Generally speaking, it is to be paved, but if it is not the bottom layer, there is not much requirement; The significance of laying the moisture-proof film is mainly 1) because the paint board is not grindable, so the moisture-proof film has the effect of adjusting the ground level. 2) It can increase the moisture-proof performance of solid wood flooring.
This method also has disadvantages: it is not conducive to the ventilation of the bottom plate, and it will make the bottom plate mildew in the long run.
First, friends, whether you are solid wood or not, even if it is a magnetic sheet, it is best to paste the moisture-proof film two, the paste will not cost you much money, but the advantage of sticking is that the weather is humid, or due to the moisture of the water pipe problem, you have a moisture-proof membrane, water vapor is paid on the membrane, will not cause your ground to rot by moisture, for example, wooden floor. If it is magnetic, once it is wet, there is a layer of moisture. >>>More
The so-called film flooring is to paste aluminum film on the back of the floor, according to the publicity of the business, it seems to play a role in moisture-proof, but in fact, this film will not play any positive role, on the contrary, it will also hinder the normal expansion and moisture balance of the floor itself in the process of people's use. In addition, because the film is glued on, it also increases the amount of formaldehyde released.
In general, it is necessary to pave.
The function of laying moisture-proof film: adjust the floor level and increase the moisture-proof performance of solid wood flooring. >>>More
1. Choose moisture-proof flooring Moisture resistance is the most important technical indicator of sports wood flooring. The floor with poor moisture-proof performance will be damaged by the "steaming" of geothermal heat for a long time, once moisture enters, the edge of the floor will be warped. The high-quality floor is made of high-density substrate, which has excellent moisture-proof performance and the expansion rate of water absorption thickness is much smaller than the national standard. >>>More
Between the solid wood floor and the keel, there is generally a need for mulch, and there are also no, I personally think that it is better to put the mulch, which can play a role in shock absorption, thank you.