What is the moisture proof laying of solid wood flooring, and what are the moisture proof skills of

1. Choose moisture-proof flooring Moisture resistance is the most important technical indicator of sports wood flooring. The floor with poor moisture-proof performance will be damaged by the "steaming" of geothermal heat for a long time, once moisture enters, the edge of the floor will be warped. The high-quality floor is made of high-density substrate, which has excellent moisture-proof performance and the expansion rate of water absorption thickness is much smaller than the national standard.

In addition, the special wear-resistant layer, decorative paper and balance layer can well "seal" the substrate and ensure the overall moisture-proof performance of the floor.

2. Install moisture-proof correctly The quality of the flooring is determined by 70% of the quality of the flooring due to the quality of the sports wood flooring. The unsatisfactory use of the floor is largely caused by the inadequate floor pavement, and the problem of floor paving has become a stubborn disease that restricts the use of the floor. The installation engineer of the sports wood floor must carry out four different aspects of the measurement preparation, which can enhance the accuracy and precision for the later construction, and can effectively detect the specific degree of the five major problems of the ground, such as "sand, tide, concave, convex and crack".

In addition, the staff should pay special attention to the flatness of the ground, if the ground is guaranteed to be flat, there is no arch under the floor; If the floor is not wet, the floor will not swell, and these must be carefully inspected.

3. Control indoor humidity In the rainy season, the temperature and humidity of the air change, the floor is easy to expand or contract, and controlling the humidity in the room is the most scientific and effective way to prevent the deformation and arching of the solid wooden floor. Industry insiders suggest that the floor is moisture-proof, and the floor can be mopped with a non-dripping mop to directly humidify the floor, or the window can be closed and humidified with a humidifier. It can also be in the afternoon or evening, when the climate is relatively dry, open the window to adjust the indoor air and make the room intermittently ventilated.

Solid wood floor maintenance method 1:

The moisture-proof of solid wood flooring mainly includes two aspects: one is the moisture-proof treatment during paving, and the other is moisture-proof during ordinary use. When laying wooden floors, it is necessary to lay a moisture-proof film, apply moisture-proof oil, and do not use damp plywood and wooden fangs.

Pave floor tiles or stones on the floor of the door in the kitchen, toilet, etc. as a transition to prevent moisture from entering and exiting, and reduce the moisture process near the floor at the door.

Solid wood floor maintenance method 2:

There are also ways to improve the surrounding environmental conditions. If the outdoor humidity is greater than the indoor humidity, you can close the doors and windows to keep the indoor humidity low, and if the outdoor humidity is less than the indoor humidity, you can open the doors and windows to reduce the indoor humidity. In humid and muggy weather, you can turn on the air conditioner or electric fan, which will also reduce the humidity.

But if the weather is dry or the air conditioner is used for a long time, then it is not moisture protection but moisturizing that should be considered. Because the humidity in the room is low in this case, it will cause the solid wood floor to shrink or crack. At this time, you can use a damp mop to mop the floor to keep the solid wood floor a certain amount of moisture.

Another issue that needs to be noted is that the floor and walls of the newly built buildings have a large moisture content, so more ventilation should be provided to make the floor and walls dry as soon as possible.

Solid wood floor maintenance method three:

In daily life, it often happens that you accidentally spill water on the ground, so you don't need to be nervous, because as long as the amount is not large and the time is not long, it will not have any impact on the floor, as long as it is dried in time. If it is rainy or humid in the south, some people will worry about the increase in the moisture content of the solid wood floor, which will cause expansion and deformation. In fact, the solid wood flooring on the market is now basically treated with paint, and the ability of the floor to absorb moisture is greatly reduced, and the increase of moisture content requires a long time and process, so consumers do not have to worry too much.

Solid wood floor maintenance method four:

In addition, choosing the material of solid wood flooring according to the environment is also a wise move to prevent moisture. For example, in more humid areas, you can choose materials with low deformation, such as teak flooring, etc., and choosing high-quality floor paint is also a very effective way to prevent moisture.

The sports wood flooring materials paved in various stadiums are generally made of natural solid wood, which is easy to be damp and cause the floor to swell, peel, hollow, deformed, mildew, etc., thus affecting the beauty and use of the sports floor. What are the controllable factors of moisture on the sports floor?

1. Material selection

The processing technology of the professional gymnasium wood floor surface floor is carried out in strict accordance with the MFMA standard, and there are strict requirements for the selection, cooking, balancing time, processing environment and processing requirements of logs. The moisture content of the finished professional gymnasium wood floor surface floor is controlled at 6%-9%, and the performance is very stable.

2. Floor structure

All kinds of keel structure motion systems are the most common sports wood flooring design schemes in the sports wood flooring industry. The keel structure system of the wooden floor of the professional gymnasium has a professional moisture-proof process. For example, it is equipped with a moisture-proof film for sports wood flooring, and it is necessary to brush moisture-proof and anti-corrosion paint for sports wood flooring systems.

Kaijie sports wood flooring keel structure motion system is the independent research and development of Kaijie sports wood flooring, which is a patented technology.

4. Installation technology

Before paving the floor, ensure that the ground on the construction site is clean, dry and flat. Drying should be up to or below the local equilibrium humidity and moisture content, wet construction is strictly prohibited, laying flooring; During the installation of the sports floor, there are appropriate expansion joints around the site, generally at 30-40mm, and the expansion joints between the floors should be left between the surface layers in the on-site construction according to the local climate, humidity and the on-site environment at the time of installation.

5. Maintenance

In the daily maintenance process of the gymnasium wooden floor, it is also necessary to pay attention to moisture-proof. For example, use a vacuum cleaner or a damp cotton mop or cotton rag to wipe the wooden floor of the gymnasium, do not use a wet mop to clean the floor, open windows for ventilation, and control the humidity in the room.

Flooring is an indispensable decoration material in our decoration, and it is also a kind of decoration that is used more, such as solid wood flooring, solid wood flooring is made of natural wood, natural texture, comfortable feet, good environmental performance, very popular and loved by consumers, so many families will choose to lay solid wood flooring. So what is the moisture-proof laying of solid wood flooring, and what are the moisture-proof skills of solid wood flooring?

1.When the moisture-proof isolation layer is paved, it can be directly paved on the concrete base layer by using the empty paving method, strip sticking method or point sticking method.

2.A plastic tube can be set in the middle of the rib bone, so that the middle of the moisture-proof membrane is raised, forming a through exhaust channel, and the evaporated water enters the atmosphere through the exhaust channel.

3.The seams of the moisture-proof insulation material should be staggered. The width of the lap joint: not less than 100 when using adhesive, not less than 60 when using adhesive tape. It is strictly forbidden to use adhesive tape that is not waterproof.

4.The moisture-proof isolation layer should be flanged around the height of the skirting board exhaust groove, and should be kept intact and sealed. If there is any damage, it should be repaired in time.

5.Bathrooms and kitchens should have waterproof, leak-proof, leak-proof, and seepage-proof protective facilities, and if they are not available, they should be constructed after renovation.

6.To check the waterproof and moisture-proof measures for the balcony and other parts that are prone to water leakage, the waterproof coating should be 200-300 above the ground when the waterproof coating is applied near the wall of the room.

7.The water-blocking and partitioning measures can be made of synthetic polymer membrane, polymer modified asphalt membrane and other materials, and the flanging height is not less than 150, or fortified according to the design requirements.

8.The floor elevation of the bathroom and kitchen should be 15-20 lower than the floor of the room, or meet the design requirements.

The above detailed introduction of some tips for the installation of solid wood flooring, here is a reminder that one point to pay attention to is: after the correct paving, the actual moisture content of the floor in the northern region is 12% 13% in summer, and the moisture content of the floor is 6% 7% in the dry and hot environment (about 30% of the air) in the winter environmentThat is to say, the moisture content of the floor after paving should reach 12% and 13% in summer (rainy season), and the floor is in the maximum solid state.