Why is multi layer solid wood flooring moisture proof

1. Drying of sports wood floors.

In the production process of solid wood sports wood flooring, a professional drying process must be carried out. This art is very important. When the sports wood floor leaves the factory, the moisture content of the sports wood floor should be balanced. How much exactly? It should be adapted to the climate and environment where the stadium is located.

2. Install moisture-proof measures.

Before the installation of sports wood flooring, it is necessary to level the pavement floor of the stadium and do a good job of dehumidification; The sports wood floor installation system should be equipped with moisture-proof membranes, ventilation holes and other moisture-proof accessories; Expansion joints should also be reserved during the installation of sports wood flooring, which can prevent dampness and bulging of sports wood flooring.

3. The humidity in the gymnasium is guaranteed to be between 35% and 50%.

Good external conditions are the basis for the maintenance of sports wood flooring, especially the environment in the gymnasium, and it is best to keep the humidity in the gymnasium between 35%-50%. If the outside air is dry due to the influence of the northern monsoon during the dry winter season, the air humidity in the building will be reduced, so it is necessary to keep the museum closed and reduce air ventilation and convection.

4. Maintenance and waterproofing.

Sports wood flooring should be waterproof in daily maintenance, such as sports wood flooring should not be soaked in water, and the water facilities of the stadium should be tested at ordinary times to prevent the sports wood floor from soaking in water.

First, choose a good paving time.

The selection of the season of the basketball court wood floor is very important, because the floor itself is made of natural wood, and the requirements for ambient temperature and humidity are relatively high, and the improper installation time can easily lead to various problems in the future use of the basketball court wood floor.

Second, do a good job of preparing before paving.

1.Ground treatment before paving.

The foundation floor of the venue needs to be cleaned before paving. First of all, clean the cement on the ground, scrape the putty, and try to keep the floor flat; Then clean the floor to remove oil stains or dust and sand from the surface of the floor to ensure that the floor is clean. It is best to brush a layer of dilute cement slurry before paving, remove the stains on the floor, and then pave after the cement is dry, and the moisture content of the general ground base shall not exceed 15.

2.Moisture-proof treatment of the material.

Material preservation is important. Basketball court wooden floor should be stored at room temperature for two days before paving, do not save money, the wet basketball court wooden floor is dried and then used, such a floor is not only easy to mold, the service life will be greatly shortened, on the reverse side of the floor is coated with a layer of moisture-proof protective paint, to prevent the paved ground from affecting the floor, resulting in the situation of floor hollowing.

Third, the paving method is exquisite.

When installing the wooden floor of the basketball court, it is necessary to reserve shrinkage joints, except for the floor expansion joints of about 1cm between the floor and the wall. The gap between the floors should also be reserved for gaps, generally not more than 1mm, and when the floor with higher density is laid, each piece should be left with a gap to prevent future arch deformation.

Fourth, it is necessary to protect after paving.

It is not to do a good job of moisture-proof work after the floor is paved, pay attention to protection after paving, within 48 hours after the wooden floor of the basketball court is paved (generally this period of time becomes the health period of the floor), it is necessary to avoid walking around often on the floor and placing heavy objects, so as to leave enough time for the floor adhesive to be firmly pasted and let the floor dry naturally. In this way, the floor will be natural and durable.

It is related to the structure of multi-layer solid wood flooring, multi-layer solid wood flooring, its base material is plywood, and the plywood in the production process makes the structure of each layer of veneer criss-crossed, changing the unidirectional nature of the wood, so as to be more moisture-proof. ,

If you remove the moisture-proof layer on the surface of the laminate floor, the laminate floor will be absorbed when it encounters water, and it will rise after absorption, and it will be powdered if it rises. The multi-layer solid wood floor is also a real book, relatively speaking, the absorption of water is not so fast. And even if it dries up after absorbing water, it's still wood, but it may be a little deformed.

In fact, multi-layer solid wood is very simple, if the process and materials are passed, you don't have to worry so much about using it, find some big brands, now some composite floors are not glued, and the price will not be much higher, my two houses are using composite flooring, and then make a special moisture-proof film underground, it's OK!

Because the amount of moisture-proof agent added to the glue is relatively large.